Merge remote-tracking branch 'origin/master' into develop

This commit is contained in:
QMK Bot 2021-06-11 10:35:43 +00:00
commit 0f226a30be
26 changed files with 1008 additions and 24 deletions

View file

@ -1,16 +1,12 @@
# Matrix 8XV1.2 OG keyboard
![Matrix 8XV1.2 OG](https://raw.githubusercontent.com/yulei/qmk_webusb_tool/master/public/m12og.jpg)
![Matrix 8XV1.2 OG](https://i.imgur.com/NELL6Sbl.jpg)
This was the Matrix 8XV1.2 OG keyboard made by the Matrix team. Note: this firmware only support ISO/ANSI version,
and DO NOT support the 8XV1.2 OG ANSI only version.
This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.
* Keyboard Maintainer: [astro](https://github.com/yulei)
* Hardware Supported: Matrix 8XV1.2 OG (ISO/ANSI) keyboard
* Hardware Availability: Matrix Lab
There are two versions of the PCB available.
Make example for this keyboard (after setting up your build environment):
make matrix/m12og:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|Version|Features |
|-------|-----------------------------------------------------|
|rev1 |Green/Yellow PCB / ARM STM32 controller / ANSI only |
|rev2 |White PCB / Atmel AVR controller / ANSI/ISO |

View file

@ -0,0 +1,50 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include <hal.h>
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
#if HAL_USE_PAL || defined(__DOXYGEN__)
const PALConfig pal_default_config =
{
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
};
#endif
/*
* Early initialization code.
* This initialization must be performed just after stack setup and before
* any other initialization.
*/
void __early_init(void) {
stm32_clock_init();
}
/*
* Board-specific initialization code.
*/
void boardInit(void) {
}

View file

@ -0,0 +1,142 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Board identifier.
*/
#define BOARD_M12OG
#define BOARD_NAME "Matrix 12og keyboard"
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 8000000
/*
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
*
* Only xB (128KB Flash) is defined, but it's identical to the
* x8 version (64KB Flash) except for the Flash region size in the
* linker script. For x8 parts use xB here and change to the x8 linker
* script in the project Makefile.
*/
#define STM32F103xB
/*
* IO pins assignments
*
* numbering is sorted by onboard/connectors, as from the schematics in
* http://www.vcc-gnd.com/read.php?tid=369
*/
/* on-board */
#define GPIOA_USBDM 11 // pin 8
#define GPIOA_USBDP 12 // pin 9
#define GPIOC_OSC32_IN 14
#define GPIOC_OSC32_OUT 15
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
/*
* Port A setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */
#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF
/*
* Port B setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
/*
* Port C setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup.
* Everything input with pull-up except:
* PD0 - Normal input (XTAL).
* PD1 - Normal input (XTAL).
*/
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
/*
* USB bus activation macro, required by the USB driver.
*/
#define usb_lld_connect_bus(usbp) /* always connected */
/*
* USB bus de-activation macro, required by the USB driver.
*/
#define usb_lld_disconnect_bus(usbp) /* always connected */
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */

View file

@ -0,0 +1,5 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/m12og_v1/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/m12og_v1

View file

@ -0,0 +1,40 @@
/* Copyright 2020 QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* This file was auto-generated by:
* `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/chconf.h -r platforms/chibios/common/configs/chconf.h`
*/
#pragma once
#define CH_CFG_ST_TIMEDELTA 0
#define CH_CFG_USE_REGISTRY TRUE
#define CH_CFG_USE_WAITEXIT TRUE
#define CH_CFG_USE_CONDVARS TRUE
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
#define CH_CFG_USE_MESSAGES TRUE
#define CH_CFG_USE_MAILBOXES TRUE
#define CH_CFG_USE_HEAP TRUE
#include_next <chconf.h>

View file

@ -0,0 +1,54 @@
/*
Copyright 2021 kb-elmo<mail@elmo.space>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4D58
#define PRODUCT_ID 0x0369
#define DEVICE_VER 0x0001
#define MANUFACTURER matrix
#define PRODUCT m12og_v1
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 16
/* Keyboard Matrix Assignments */
#define MATRIX_ROW_PINS { A0, A1, A2, A3, A4, A5 }
#define MATRIX_COL_PINS { C0, C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 }
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Status LEDs */
#define LED_CAPS_LOCK_PIN B6
#define LED_SCROLL_LOCK_PIN B5
/* RGB */
#define RGB_DI_PIN B8
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 16
#define RGBLIGHT_SLEEP
#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

View file

@ -0,0 +1,26 @@
/* Copyright 2020 QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* This file was auto-generated by:
* `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/halconf.h -r platforms/chibios/common/configs/halconf.h`
*/
#pragma once
#define HAL_USE_PWM TRUE
#include_next <halconf.h>

View file

@ -0,0 +1,99 @@
{
"keyboard_name": "Matrix 8XV1.2 OG rev1",
"url": "",
"maintainer": "kb-elmo",
"width": 18.25,
"height": 6.5,
"layouts": {
"LAYOUT_all": {
"layout": [
{"label":"Esc", "x":0, "y":0},
{"label":"F1", "x":2, "y":0},
{"label":"F2", "x":3, "y":0},
{"label":"F3", "x":4, "y":0},
{"label":"F4", "x":5, "y":0},
{"label":"F5", "x":6.5, "y":0},
{"label":"F6", "x":7.5, "y":0},
{"label":"F7", "x":8.5, "y":0},
{"label":"F8", "x":9.5, "y":0},
{"label":"F9", "x":11, "y":0},
{"label":"F10", "x":12, "y":0},
{"label":"F11", "x":13, "y":0},
{"label":"F12", "x":14, "y":0},
{"label":"PrtSc", "x":15.25, "y":0},
{"label":"Scroll Lock", "x":16.25, "y":0},
{"label":"Pause", "x":17.25, "y":0},
{"label":"~", "x":0, "y":1.5},
{"label":"!", "x":1, "y":1.5},
{"label":"@", "x":2, "y":1.5},
{"label":"#", "x":3, "y":1.5},
{"label":"$", "x":4, "y":1.5},
{"label":"%", "x":5, "y":1.5},
{"label":"^", "x":6, "y":1.5},
{"label":"&", "x":7, "y":1.5},
{"label":"*", "x":8, "y":1.5},
{"label":"(", "x":9, "y":1.5},
{"label":")", "x":10, "y":1.5},
{"label":"_", "x":11, "y":1.5},
{"label":"+", "x":12, "y":1.5},
{"label":"Backspace", "x":13, "y":1.5, "w":2},
{"label":"Insert", "x":15.25, "y":1.5},
{"label":"Home", "x":16.25, "y":1.5},
{"label":"PgUp", "x":17.25, "y":1.5},
{"label":"Tab", "x":0, "y":2.5, "w":1.5},
{"label":"Q", "x":1.5, "y":2.5},
{"label":"W", "x":2.5, "y":2.5},
{"label":"E", "x":3.5, "y":2.5},
{"label":"R", "x":4.5, "y":2.5},
{"label":"T", "x":5.5, "y":2.5},
{"label":"Y", "x":6.5, "y":2.5},
{"label":"U", "x":7.5, "y":2.5},
{"label":"I", "x":8.5, "y":2.5},
{"label":"O", "x":9.5, "y":2.5},
{"label":"P", "x":10.5, "y":2.5},
{"label":"{", "x":11.5, "y":2.5},
{"label":"}", "x":12.5, "y":2.5},
{"label":"|", "x":13.5, "y":2.5, "w":1.5},
{"label":"Delete", "x":15.25, "y":2.5},
{"label":"End", "x":16.25, "y":2.5},
{"label":"PgDn", "x":17.25, "y":2.5},
{"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
{"label":"A", "x":1.75, "y":3.5},
{"label":"S", "x":2.75, "y":3.5},
{"label":"D", "x":3.75, "y":3.5},
{"label":"F", "x":4.75, "y":3.5},
{"label":"G", "x":5.75, "y":3.5},
{"label":"H", "x":6.75, "y":3.5},
{"label":"J", "x":7.75, "y":3.5},
{"label":"K", "x":8.75, "y":3.5},
{"label":"L", "x":9.75, "y":3.5},
{"label":":", "x":10.75, "y":3.5},
{"label":"\"", "x":11.75, "y":3.5},
{"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
{"label":"Shift", "x":0, "y":4.5, "w":2.25},
{"label":"Z", "x":2.25, "y":4.5},
{"label":"X", "x":3.25, "y":4.5},
{"label":"C", "x":4.25, "y":4.5},
{"label":"V", "x":5.25, "y":4.5},
{"label":"B", "x":6.25, "y":4.5},
{"label":"N", "x":7.25, "y":4.5},
{"label":"M", "x":8.25, "y":4.5},
{"label":"<", "x":9.25, "y":4.5},
{"label":">", "x":10.25, "y":4.5},
{"label":"?", "x":11.25, "y":4.5},
{"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
{"label":"\u2191", "x":16.25, "y":4.5},
{"label":"Ctrl", "x":0, "y":5.5, "w":1.5},
{"label":"Win", "x":1.5, "y":5.5},
{"label":"Alt", "x":2.5, "y":5.5, "w":1.5},
{"x":4, "y":5.5, "w":7},
{"label":"Win", "x":11, "y":5.5, "w":1.5},
{"label":"Menu", "x":12.5, "y":5.5},
{"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5},
{"label":"\u2190", "x":15.25, "y":5.5},
{"label":"\u2193", "x":16.25, "y":5.5},
{"label":"\u2192", "x":17.25, "y":5.5}
]
}
}
}

View file

@ -0,0 +1,50 @@
/* Copyright 2021 kb-elmo<mail@elmo.space>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_all(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[1] = LAYOUT_all(
KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD, KC_TRNS, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};
bool led_update_user(led_t led_state) {
static uint8_t caps_state = 0;
if (caps_state != led_state.caps_lock) {
if (led_state.caps_lock) {
rgblight_sethsv_noeeprom_cyan();
rgblight_mode_noeeprom(1);
} else {
rgblight_sethsv_noeeprom(5, 255, 255);
rgblight_mode_noeeprom(37);
}
caps_state = led_state.caps_lock;
}
return true;
};

View file

@ -0,0 +1,85 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* STM32F103xB memory setup for use with the matrix 12og mass-storage device bootloader.
*/
MEMORY
{
flash0 : org = 0x08018000, len = 128k - 0x18000
flash1 : org = 0x00000000, len = 0
flash2 : org = 0x00000000, len = 0
flash3 : org = 0x00000000, len = 0
flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0
ram0 : org = 0x20000000, len = 20k
ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash0);
REGION_ALIAS("XTORS_FLASH_LMA", flash0);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash0);
REGION_ALIAS("TEXT_FLASH_LMA", flash0);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash0);
REGION_ALIAS("RODATA_FLASH_LMA", flash0);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash0);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash0);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld

View file

@ -0,0 +1,96 @@
/* Copyright 2021 xyzz
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include "util.h"
#include "matrix.h"
#include "debounce.h"
#include "quantum.h"
static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
static void select_col(uint8_t col) {
setPinOutput(col_pins[col]);
writePinHigh(col_pins[col]);
}
static void unselect_col(uint8_t col) { setPinInputLow(col_pins[col]); }
static void unselect_cols(void) {
for (uint8_t x = 0; x < MATRIX_COLS; x++) {
setPinInputLow(col_pins[x]);
}
}
static void init_pins(void) {
unselect_cols();
for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
setPinInputLow(row_pins[x]);
}
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
bool matrix_changed = false;
// Select col and wait for col selecton to stabilize
select_col(current_col);
matrix_io_delay();
// For each row...
for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) {
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[row_index];
matrix_row_t current_row_value = last_row_value;
// Check row pin state
if (readPin(row_pins[row_index]) != 0) {
// Pin LO, set col bit
current_row_value |= (MATRIX_ROW_SHIFTER << current_col);
} else {
// Pin HI, clear col bit
current_row_value &= ~(MATRIX_ROW_SHIFTER << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_row_value)) {
matrix_changed |= true;
current_matrix[row_index] = current_row_value;
}
}
// Unselect col
unselect_col(current_col);
return matrix_changed;
}
void matrix_init_custom(void) {
// initialize key pins
init_pins();
}
uint8_t matrix_scan_custom(matrix_row_t current_matrix[]) {
bool changed = false;
// Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
changed |= read_rows_on_col(current_matrix, current_col);
}
return (uint8_t)changed;
}

View file

@ -0,0 +1,209 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define STM32F103_MCUCONF
/*
* STM32F103 drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED FALSE
#define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_USB_CLOCK_REQUIRED TRUE
#define STM32_USBPRE STM32_USBPRE_DIV1P5
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
/*
* ADC driver system settings.
*/
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC1_IRQ_PRIORITY 6
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM5 FALSE
#define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
#define STM32_I2C_I2C1_DMA_PRIORITY 3
#define STM32_I2C_I2C2_DMA_PRIORITY 3
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 FALSE
#define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 TRUE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
/*
* RTC driver system settings.
*/
#define STM32_RTC_IRQ_PRIORITY 15
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
#endif /* _MCUCONF_H_ */

View file

@ -0,0 +1,26 @@
# Matrix 8XV1.2 OG keyboard
![Matrix 8XV1.2 OG](https://i.imgur.com/NELL6Sbl.jpg)
This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.
Note: This firmware only supports ANSI only version (green/yellow PCB), and DOES NOT support the 8XV1.2 OG ISO/ANSI version.
* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
* Hardware Supported: Matrix 8XV1.2 OG ANSI only PCB
* Hardware Availability: Matrix Lab
Make example for this keyboard (after setting up your build environment):
make matrix/m12og/rev1:default
---
**Bootloader:**
Hold down ESC while plugging in the keyboard. The board will show up as a mass storage device on your computer. Drag and drop the compiled firmware .bin file into it. The board will automatically reset and load the new firmware.
:no_entry: **DO NOT DO THIS ON A MAC OS SYSTEM! IT WILL PERMANENTLY BRICK THE KEYBOARD!!!**
---
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View file

@ -0,0 +1,27 @@
/* Copyright 2021 kb-elmo<mail@elmo.space>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "rev1.h"
void board_init(void) {
writePinLow(A8);
}
void keyboard_post_init_kb(void) {
rgblight_enable_noeeprom();
rgblight_sethsv_noeeprom(5, 255, 255);
rgblight_mode_noeeprom(37);
}

View file

@ -0,0 +1,37 @@
/* Copyright 2021 kb-elmo<mail@elmo.space>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define ____ KC_NO
#define LAYOUT_all( \
k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, \
k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k213, k313, k114, k115, \
k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k113, k314, k214, k215, \
k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, \
k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, \
k500, k501, k502, k505, k506, k507, k508, k413, k414, k315 \
) { \
{ k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015 }, \
{ k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115 }, \
{ k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215 }, \
{ k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k315 }, \
{ k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, k414, ____ }, \
{ k500, k501, k502, ____, ____, k505, k506, k507, k508, ____, ____, ____, ____, ____, ____, ____ } \
}

View file

@ -0,0 +1,26 @@
# MCU name
MCU = STM32F103
MCU_LDSCRIPT = m12og_v1
BOARD = m12og_v1
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Bootmagic disabled because Matrix bootlaoder uses it's own reset mechanism
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # HAS TO BE ON! Otherwise the custom matrix doesn't work
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite
SRC += matrix.c

View file

@ -1,5 +1,5 @@
{
"keyboard_name": "Matrix/8XV1.2OG ISO/ANSI",
"keyboard_name": "Matrix 8XV1.2 OG ISO/ANSI",
"url": "",
"maintainer": "qmk",
"width": 18.25,

View file

@ -0,0 +1,16 @@
# Matrix 8XV1.2 OG keyboard
![Matrix 8XV1.2 OG](https://i.imgur.com/NELL6Sbl.jpg)
This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.
Note: This firmware only supports ISO/ANSI version (white PCB), and DOES NOT support the 8XV1.2 OG ANSI only version.
* Keyboard Maintainer: [astro](https://github.com/yulei)
* Hardware Supported: Matrix 8XV1.2 OG (ISO/ANSI) PCB
* Hardware Availability: Matrix Lab
Make example for this keyboard (after setting up your build environment):
make matrix/m12og/rev2:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View file

@ -1,8 +1,8 @@
/**
* m12og.c
* rev2.c
*/
#include "m12og.h"
#include "rev2.h"
void matrix_init_user(void) {
setPinOutput(C6);

View file

@ -23,12 +23,12 @@
}
#define LAYOUT_tkl_iso( \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K500, K501, K502, \
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, K503, K504, K505, \
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K506, K507, K508, \
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K610, \
K600, K601, K602, K603, K604, K605, K606, K607, K608, K609 \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K500, K501, K502, \
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, K503, K504, K505, \
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K506, K507, K508, \
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K610, \
K600, K601, K602, K603, K604, K605, K606, K607, K608, K609 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO }, \
@ -40,11 +40,11 @@
}
#define LAYOUT_tkl_ansi( \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K500, K501, K502,\
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, K503, K504, K505,\
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K506, K507, K508,\
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K500, K501, K502, \
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, K503, K504, K505, \
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K506, K507, K508, \
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \
K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K610, \
K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K610, \
K600, K601, K602, K603, K604, K605, K606, K607, K608, K609 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \