Merge remote-tracking branch 'origin/master' into develop

This commit is contained in:
QMK Bot 2021-12-27 01:25:35 +00:00
commit 11d5ff415f
8 changed files with 346 additions and 0 deletions

101
keyboards/mntre/config.h Normal file
View file

@ -0,0 +1,101 @@
// Copyright 2021 Cedric Vincent (@cdc-mkb)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x1302
#define DEVICE_VER 0x0002
#define MANUFACTURER MNT Research GmbH
#define PRODUCT MNT Reform USB Keyboard (Standalone)
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6, D4 }
#define MATRIX_COL_PINS { D5, F7, E6, C7, B3, B2, B1, B0, F0, F1, F4, F5, F6, C6 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN B7
#define BACKLIGHT_CUSTOM_RESOLUTION 0x400
#define BACKLIGHT_LIMIT_VAL 84
//#define BACKLIGHT_LEVELS 3
//#define BACKLIGHT_BREATHING
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0

98
keyboards/mntre/info.json Normal file
View file

@ -0,0 +1,98 @@
{
"keyboard_name": "MNT Reform USB Keyboard (Standalone)",
"url": "https://shop.mntmn.com/products/mnt-reform-usb-keyboard-standalone",
"maintainer": "cdc-mkb",
"layouts": {
"LAYOUT": {
"layout": [
{"label": "ESC", "x": 0, "y": 0},
{"label": "F1", "x": 1, "y": 0},
{"label": "F2", "x": 2, "y": 0},
{"label": "F3", "x": 3, "y": 0},
{"label": "F4", "x": 4, "y": 0},
{"label": "F5", "x": 5, "y": 0},
{"label": "F6", "x": 6, "y": 0},
{"label": "F7", "x": 7, "y": 0},
{"label": "F8", "x": 8, "y": 0},
{"label": "F9", "x": 9, "y": 0},
{"label": "F10", "x": 10, "y": 0},
{"label": "F11", "x": 11, "y": 0},
{"label": "F12", "x": 12, "y": 0},
{"label": "NO", "x": 13, "y": 0, "w": 1.5},
{"label": "GRAVE", "x": 0, "y": 1},
{"label": "1", "x": 1, "y": 1},
{"label": "2", "x": 2, "y": 1},
{"label": "3", "x": 3, "y": 1},
{"label": "4", "x": 4, "y": 1},
{"label": "5", "x": 5, "y": 1},
{"label": "6", "x": 6, "y": 1},
{"label": "7", "x": 7, "y": 1},
{"label": "8", "x": 8, "y": 1},
{"label": "9", "x": 9, "y": 1},
{"label": "0", "x": 10, "y": 1},
{"label": "MINUS", "x": 11, "y": 1},
{"label": "EQUAL", "x": 12, "y": 1},
{"label": "BSPACE", "x": 13, "y": 1, "w": 1.5},
{"label": "TAB", "x": 0, "y": 2, "w": 1.5},
{"label": "Q", "x": 1.5, "y": 2},
{"label": "W", "x": 2.5, "y": 2},
{"label": "E", "x": 3.5, "y": 2},
{"label": "R", "x": 4.5, "y": 2},
{"label": "T", "x": 5.5, "y": 2},
{"label": "Y", "x": 6.5, "y": 2},
{"label": "U", "x": 7.5, "y": 2},
{"label": "I", "x": 8.5, "y": 2},
{"label": "O", "x": 9.5, "y": 2},
{"label": "P", "x": 10.5, "y": 2},
{"label": "LBRACKET", "x": 11.5, "y": 2},
{"label": "RBRACKET", "x": 12.5, "y": 2},
{"label": "BSLASH", "x": 13.5, "y": 2},
{"label": "LCTRL", "x": 0, "y": 3},
{"label": "APP", "x": 1, "y": 3},
{"label": "A", "x": 2, "y": 3},
{"label": "S", "x": 3, "y": 3},
{"label": "D", "x": 4, "y": 3},
{"label": "F", "x": 5, "y": 3},
{"label": "G", "x": 6, "y": 3},
{"label": "H", "x": 7, "y": 3},
{"label": "J", "x": 8, "y": 3},
{"label": "K", "x": 9, "y": 3},
{"label": "L", "x": 10, "y": 3},
{"label": "SCOLON", "x": 11, "y": 3},
{"label": "QUOTE", "x": 12, "y": 3},
{"label": "ENTER", "x": 13, "y": 3, "w": 1.5},
{"label": "LSHIFT", "x": 0, "y": 4, "w": 1.5},
{"label": "DEL", "x": 1.5, "y": 4},
{"label": "Z", "x": 2.5, "y": 4},
{"label": "X", "x": 3.5, "y": 4},
{"label": "C", "x": 4.5, "y": 4},
{"label": "V", "x": 5.5, "y": 4},
{"label": "B", "x": 6.5, "y": 4},
{"label": "N", "x": 7.5, "y": 4},
{"label": "M", "x": 8.5, "y": 4},
{"label": "COMMA", "x": 9.5, "y": 4},
{"label": "DOT", "x": 10.5, "y": 4},
{"label": "SLASH", "x": 11.5, "y": 4},
{"label": "UP", "x": 12.5, "y": 4},
{"label": "RSHIFT", "x": 13.5, "y": 4},
{"label": "RGUI", "x": 0, "y": 5, "w": 1.5},
{"label": "LGUI", "x": 1.5, "y": 5, "w": 1.5},
{"label": "RCTRL", "x": 3, "y": 5, "w": 1.5},
{"label": "SPACE", "x": 4.5, "y": 5, "w": 1.5},
{"label": "LALT", "x": 6, "y": 5},
{"label": "RALT", "x": 7, "y": 5},
{"label": "SPACE", "x": 8, "y": 5, "w": 1.5},
{"label": "PGUP", "x": 9.5, "y": 5},
{"label": "PGDOWN", "x": 10.5, "y": 5},
{"label": "LEFT", "x": 11.5, "y": 5},
{"label": "DOWN", "x": 12.5, "y": 5},
{"label": "RIGHT", "x": 13.5, "y": 5},
]
}
}
}

View file

@ -0,0 +1,31 @@
// Copyright 2021 Cedric Vincent (@cdc-mkb)
// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_FN,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Base */
[_BASE] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MO(_FN),
KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSPACE,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRACKET, KC_RBRACKET, KC_BSLASH,
KC_LCTRL, KC_APP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOTE, KC_ENTER,
KC_LSHIFT, KC_DEL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_UP, KC_RSHIFT,
KC_RGUI, KC_LGUI, KC_RCTRL, KC_SPACE, KC_LALT, KC_RALT, KC_SPACE, KC_PGUP, KC_PGDOWN, KC_LEFT, KC_DOWN, KC_RIGHT
),
[_FN] = LAYOUT(
_______, BL_DEC, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
};

View file

@ -0,0 +1,19 @@
# Default layout of MNT Reform USB Keyboard (Standalone)
This is exactly the same layout as in the original firmware.
Backlight level can be decreased and increased using Fn+F1 and Fn+F2
respectively.
┏━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━━━━━┓
┃ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │ Fn ┃
┠──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────────┨
┃ `~ │ 1! │ 2@ │ 3# │ 4$ │ 5% │ 6^ │ 7& │ 8* │ 9( │ 0) │ -_ │ =+ │ Backspace┃
┠──────┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──────┨
┃ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [{ │ ]} │ \| ┃
┠──────┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──────┨
┃ LCtrl│ App │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ;: │ '" │ Enter ┃
┠──────┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──────┨
┃ LShift │ Del │ Z │ X │ C │ V │ B │ N │ M │ ,< │ .> │ /? │ Up │RShift┃
┠──────────┼──────┴──┬───┴──────┼──────┴──┬───┴──┬───┴──┬───┴──────┼──────┼──────┼──────┼──────┼──────┨
┃ RGUI │ LGUI │ RCtrl │ Space │ LAlt │ RAlt │ Space │ PgUp │ PgDn │ Left │ Down │ Right┃
┗━━━━━━━━━━┷━━━━━━━━━┷━━━━━━━━━━┷━━━━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━┛

19
keyboards/mntre/mntre.c Normal file
View file

@ -0,0 +1,19 @@
// Copyright 2021 Cedric Vincent (@cdc-mkb)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "mntre.h"
#ifdef OLED_ENABLE
bool oled_task_kb(void) {
if (!oled_task_user()) { return false; }
static const char PROGMEM qmk_logo[] = {
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
};
oled_write_P(qmk_logo, false);
return true;
}
#endif

30
keyboards/mntre/mntre.h Normal file
View file

@ -0,0 +1,30 @@
// Copyright 2021 Cedric Vincent (@cdc-mkb)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "quantum.h"
/* This is a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, \
k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b \
) { \
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d }, \
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d }, \
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d }, \
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d }, \
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d }, \
{ k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, KC_NO, KC_NO } \
}

27
keyboards/mntre/readme.md Normal file
View file

@ -0,0 +1,27 @@
# MNT Reform USB Keyboard (Standalone)
![MNT Reform USB Keyboard (Standalone)](https://shop.mntmn.com/spree/products/117/large/reform-standalone-black-full.jpg)
A compact and slim mechanical keyboard designed for comfort and portability.
* Keyboard QMK port Maintainer: [cdc-mkb](https://github.com/cdc-mkb)
* Hardware Supported: MNT Reform USB Keyboard (Standalone)
* Hardware Availability: https://shop.mntmn.com/products/mnt-reform-usb-keyboard-standalone
Make example for this keyboard (after setting up your build environment):
make mntre:default
Flashing example for this keyboard:
make mntre:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the "Esc" key and plug in the keyboard
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (default: "Circle" + "R")
* **Physical reset button**: Remove the keyboards frame and toggle the programming DIP switch SW84 on the keyboard to “ON”. Then press the reset button SW83.

21
keyboards/mntre/rules.mk Normal file
View file

@ -0,0 +1,21 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = no # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
OLED_ENABLE = yes
BACKLIGHT_DRIVER = pwm