[Docs] Added information on soldering diodes in parallel (#13117)

Co-authored-by: Ryan <fauxpark@gmail.com>
This commit is contained in:
officereso 2021-07-30 00:56:27 -05:00 committed by GitHub
parent a1f7d86ef5
commit 6fd9b2feba
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -113,7 +113,7 @@ Don't hold the iron on the solder/joint longer than necessary. Heat will be cond
#### Soldering the Diodes
Starting at the top-left switch, place the diode (with tweezers if you have them) on the switch so that the diode itself is vertically aligned, and the black line is facing toward you. The input lead of the diode should be touching the left contact on the switch, and the bent, output end should be facing to the right and resting on the switch there, like this:
Starting at the top-left switch, place the diode (with tweezers if you have them) on the switch so that the diode itself is vertically aligned, and the black line is facing toward you. Make sure the diodes are soldered in parallel (diode outputs shouldn't connect to diode inputs). The input lead of the diode should be touching the left contact on the switch, and the bent, output end should be facing to the right and resting on the switch there, like this:
![soldering-diodes-01.png](https://raw.githubusercontent.com/noroadsleft/qmk_images/master/docs/hand_wire/soldering-diodes-01.png)