ChibiOS: Consolidate report sending code (#19607)

This commit is contained in:
Ryan 2023-01-17 12:54:26 +11:00 committed by GitHub
parent 6fd4d8c7ee
commit 7acc3f4449
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -859,65 +859,48 @@ uint8_t keyboard_leds(void) {
return keyboard_led_state;
}
void send_report(uint8_t endpoint, void *report, size_t size) {
osalSysLock();
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
osalSysUnlock();
return;
}
if (usbGetTransmitStatusI(&USB_DRIVER, endpoint)) {
/* Need to either suspend, or loop and call unlock/lock during
* every iteration - otherwise the system will remain locked,
* no interrupts served, so USB not going through as well.
* Note: for suspend, need USB_USE_WAIT == TRUE in halconf.h */
if (osalThreadSuspendTimeoutS(&(&USB_DRIVER)->epc[endpoint]->in_state->thread, TIME_MS2I(10)) == MSG_TIMEOUT) {
osalSysUnlock();
return;
}
}
usbStartTransmitI(&USB_DRIVER, endpoint, report, size);
osalSysUnlock();
}
/* prepare and start sending a report IN
* not callable from ISR or locked state */
void send_keyboard(report_keyboard_t *report) {
osalSysLock();
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
goto unlock;
}
uint8_t ep = KEYBOARD_IN_EPNUM;
size_t size = KEYBOARD_REPORT_SIZE;
/* If we're in Boot Protocol, don't send any report ID or other funky fields */
if (!keyboard_protocol) {
send_report(ep, &report->mods, 8);
} else {
#ifdef NKRO_ENABLE
if (keymap_config.nkro && keyboard_protocol) { /* NKRO protocol */
/* need to wait until the previous packet has made it through */
/* can rewrite this using the synchronous API, then would wait
* until *after* the packet has been transmitted. I think
* this is more efficient */
/* busy wait, should be short and not very common */
if (usbGetTransmitStatusI(&USB_DRIVER, SHARED_IN_EPNUM)) {
/* Need to either suspend, or loop and call unlock/lock during
* every iteration - otherwise the system will remain locked,
* no interrupts served, so USB not going through as well.
* Note: for suspend, need USB_USE_WAIT == TRUE in halconf.h */
osalThreadSuspendS(&(&USB_DRIVER)->epc[SHARED_IN_EPNUM]->in_state->thread);
if (keymap_config.nkro) {
ep = SHARED_IN_EPNUM;
size = sizeof(struct nkro_report);
}
#endif
/* after osalThreadSuspendS returns USB status might have changed */
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
goto unlock;
}
}
usbStartTransmitI(&USB_DRIVER, SHARED_IN_EPNUM, (uint8_t *)report, sizeof(struct nkro_report));
} else
#endif /* NKRO_ENABLE */
{ /* regular protocol */
/* need to wait until the previous packet has made it through */
/* busy wait, should be short and not very common */
if (usbGetTransmitStatusI(&USB_DRIVER, KEYBOARD_IN_EPNUM)) {
/* Need to either suspend, or loop and call unlock/lock during
* every iteration - otherwise the system will remain locked,
* no interrupts served, so USB not going through as well.
* Note: for suspend, need USB_USE_WAIT == TRUE in halconf.h */
osalThreadSuspendS(&(&USB_DRIVER)->epc[KEYBOARD_IN_EPNUM]->in_state->thread);
/* after osalThreadSuspendS returns USB status might have changed */
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
goto unlock;
}
}
uint8_t *data, size;
if (keyboard_protocol) {
data = (uint8_t *)report;
size = KEYBOARD_REPORT_SIZE;
} else { /* boot protocol */
data = &report->mods;
size = 8;
}
usbStartTransmitI(&USB_DRIVER, KEYBOARD_IN_EPNUM, data, size);
send_report(ep, report, size);
}
keyboard_report_sent = *report;
unlock:
osalSysUnlock();
keyboard_report_sent = *report;
}
/* ---------------------------------------------------------
@ -925,35 +908,13 @@ unlock:
* ---------------------------------------------------------
*/
void send_mouse(report_mouse_t *report) {
#ifdef MOUSE_ENABLE
void send_mouse(report_mouse_t *report) {
osalSysLock();
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
osalSysUnlock();
return;
}
if (usbGetTransmitStatusI(&USB_DRIVER, MOUSE_IN_EPNUM)) {
/* Need to either suspend, or loop and call unlock/lock during
* every iteration - otherwise the system will remain locked,
* no interrupts served, so USB not going through as well.
* Note: for suspend, need USB_USE_WAIT == TRUE in halconf.h */
if (osalThreadSuspendTimeoutS(&(&USB_DRIVER)->epc[MOUSE_IN_EPNUM]->in_state->thread, TIME_MS2I(10)) == MSG_TIMEOUT) {
osalSysUnlock();
return;
}
}
usbStartTransmitI(&USB_DRIVER, MOUSE_IN_EPNUM, (uint8_t *)report, sizeof(report_mouse_t));
send_report(MOUSE_IN_EPNUM, report, sizeof(report_mouse_t));
mouse_report_sent = *report;
osalSysUnlock();
#endif
}
#else /* MOUSE_ENABLE */
void send_mouse(report_mouse_t *report) {
(void)report;
}
#endif /* MOUSE_ENABLE */
/* ---------------------------------------------------------
* Extrakey functions
* ---------------------------------------------------------
@ -961,97 +922,25 @@ void send_mouse(report_mouse_t *report) {
void send_extra(report_extra_t *report) {
#ifdef EXTRAKEY_ENABLE
osalSysLock();
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
osalSysUnlock();
return;
}
if (usbGetTransmitStatusI(&USB_DRIVER, SHARED_IN_EPNUM)) {
/* Need to either suspend, or loop and call unlock/lock during
* every iteration - otherwise the system will remain locked,
* no interrupts served, so USB not going through as well.
* Note: for suspend, need USB_USE_WAIT == TRUE in halconf.h */
if (osalThreadSuspendTimeoutS(&(&USB_DRIVER)->epc[SHARED_IN_EPNUM]->in_state->thread, TIME_MS2I(10)) == MSG_TIMEOUT) {
osalSysUnlock();
return;
}
}
usbStartTransmitI(&USB_DRIVER, SHARED_IN_EPNUM, (uint8_t *)report, sizeof(report_extra_t));
osalSysUnlock();
send_report(SHARED_IN_EPNUM, report, sizeof(report_extra_t));
#endif
}
void send_programmable_button(report_programmable_button_t *report) {
#ifdef PROGRAMMABLE_BUTTON_ENABLE
osalSysLock();
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
osalSysUnlock();
return;
}
if (usbGetTransmitStatusI(&USB_DRIVER, SHARED_IN_EPNUM)) {
/* Need to either suspend, or loop and call unlock/lock during
* every iteration - otherwise the system will remain locked,
* no interrupts served, so USB not going through as well.
* Note: for suspend, need USB_USE_WAIT == TRUE in halconf.h */
if (osalThreadSuspendTimeoutS(&(&USB_DRIVER)->epc[SHARED_IN_EPNUM]->in_state->thread, TIME_MS2I(10)) == MSG_TIMEOUT) {
osalSysUnlock();
return;
}
}
usbStartTransmitI(&USB_DRIVER, SHARED_IN_EPNUM, (uint8_t *)report, sizeof(report_programmable_button_t));
osalSysUnlock();
send_report(SHARED_IN_EPNUM, report, sizeof(report_programmable_button_t));
#endif
}
void send_joystick(report_joystick_t *report) {
#ifdef JOYSTICK_ENABLE
osalSysLock();
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
osalSysUnlock();
return;
}
if (usbGetTransmitStatusI(&USB_DRIVER, JOYSTICK_IN_EPNUM)) {
/* Need to either suspend, or loop and call unlock/lock during
* every iteration - otherwise the system will remain locked,
* no interrupts served, so USB not going through as well.
* Note: for suspend, need USB_USE_WAIT == TRUE in halconf.h */
if (osalThreadSuspendTimeoutS(&(&USB_DRIVER)->epc[JOYSTICK_IN_EPNUM]->in_state->thread, TIME_MS2I(10)) == MSG_TIMEOUT) {
osalSysUnlock();
return;
}
}
usbStartTransmitI(&USB_DRIVER, JOYSTICK_IN_EPNUM, (uint8_t *)report, sizeof(report_joystick_t));
osalSysUnlock();
send_report(JOYSTICK_IN_EPNUM, report, sizeof(report_joystick_t));
#endif
}
void send_digitizer(report_digitizer_t *report) {
#ifdef DIGITIZER_ENABLE
osalSysLock();
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
osalSysUnlock();
return;
}
if (usbGetTransmitStatusI(&USB_DRIVER, DIGITIZER_IN_EPNUM)) {
/* Need to either suspend, or loop and call unlock/lock during
* every iteration - otherwise the system will remain locked,
* no interrupts served, so USB not going through as well.
* Note: for suspend, need USB_USE_WAIT == TRUE in halconf.h */
if (osalThreadSuspendTimeoutS(&(&USB_DRIVER)->epc[DIGITIZER_IN_EPNUM]->in_state->thread, TIME_MS2I(10)) == MSG_TIMEOUT) {
osalSysUnlock();
return;
}
}
usbStartTransmitI(&USB_DRIVER, DIGITIZER_IN_EPNUM, (uint8_t *)report, sizeof(report_digitizer_t));
osalSysUnlock();
send_report(DIGITIZER_IN_EPNUM, report, sizeof(report_digitizer_t));
#endif
}