Remove unused RGBLight defines from config.h (#19859)

This commit is contained in:
Ryan 2023-02-17 08:13:41 +11:00 committed by GitHub
parent 86ab1c1331
commit 7fad94ba2d
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
348 changed files with 4 additions and 3706 deletions

View file

@ -44,32 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== choose animations ==*/
//# define RGBLIGHT_EFFECT_BREATHING
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
//# define RGBLIGHT_EFFECT_SNAKE
//# define RGBLIGHT_EFFECT_KNIGHT
//# define RGBLIGHT_EFFECT_CHRISTMAS
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -50,13 +50,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -54,12 +54,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -46,14 +46,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -21,23 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#undef BACKLIGHT_PIN
#define BACKLIGHT_PINS { F6, F7 }
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -23,14 +23,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -46,14 +46,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -46,14 +46,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -43,16 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -42,16 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 3
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -16,22 +16,6 @@
#pragma once
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -26,19 +26,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_PIN_ON_STATE 0
#define LED_CAPS_LOCK_PIN B0 // RX Led
#define LED_NUM_LOCK_PIN D5 // TX Led
// #define RGB_DI_PIN B1 // PB1 on expansion connector
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif

View file

@ -59,12 +59,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_SNAKE
# define RGBLIGHT_EFFECT_KNIGHT
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -56,12 +56,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -52,22 +52,6 @@ B0, which is unconnected on the PCB
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 3
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -41,16 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_PIN C6
#define BACKLIGHT_LEVELS 3
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -37,12 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
/*
#define RGB_DI_PIN D3
#define RGBLED_NUM 12 // Number of LEDs
*/
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -64,10 +64,4 @@ increase the value. If you need 2 clicks for 1 keycode, decrease*/
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif

View file

@ -50,10 +50,4 @@ increase the value. If you need 2 clicks for 1 keycode, decrease*/
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif

View file

@ -42,16 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 5
//#define RGB_DI_PIN C4
//#ifdef RGB_DI_PIN
// #define RGBLED_NUM 12
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 230 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,16 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -54,16 +54,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 3
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -60,12 +60,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -38,22 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,16 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -63,12 +63,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -54,12 +54,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -26,12 +26,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { E6, B3 }
#define MATRIX_COL_PINS { F7, B6, F4 }
/* ws2812 RGB LED */
//#define RGB_DI_PIN X
//#define RGBLED_NUM X // Number of LEDs
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW

View file

@ -38,16 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -42,22 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -37,16 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -60,12 +60,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -49,12 +49,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -42,14 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 5
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -56,20 +56,6 @@
//#define LED_KANA_PIN B4
#define RGB_DI_PIN D3
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
#ifdef RGB_MATRIX_ENABLE

View file

@ -38,22 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -44,22 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,14 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -56,12 +56,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -31,23 +31,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
//#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_SNAKE
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 88
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
#define RGBLIGHT_LIMIT_VAL 50
#endif

View file

@ -25,21 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
#ifdef RGB_MATRIX_ENABLE

View file

@ -43,22 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 3
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -45,22 +45,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -42,22 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 3
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -42,16 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define USB_MAX_POWER_CONSUMPTION 100
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -40,16 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define USB_MAX_POWER_CONSUMPTION 100
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,15 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
//#define RGB_DI_PIN D5
//#ifdef RGB_DI_PIN
//#define RGBLED_NUM 8
//#define RGBLIGHT_HUE_STEP 8
//#define RGBLIGHT_SAT_STEP 8
//#define RGBLIGHT_VAL_STEP 8
//#define RGBLIGHT_SLEEP
//#endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -38,16 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -41,16 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -40,9 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLIGHT_BREATHE_TABLE_SIZE 256
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85
#define RGBLIGHT_EFFECT_BREATHE_MAX 255
#endif
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap

View file

@ -44,9 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLIGHT_BREATHE_TABLE_SIZE 256
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85
#define RGBLIGHT_EFFECT_BREATHE_MAX 255
#endif
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap

View file

@ -56,12 +56,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -59,12 +59,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -41,22 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_CAPS_LOCK_PIN B3
#define LED_PIN_ON_STATE 0
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,22 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -26,13 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIODE_DIRECTION COL2ROW
#define SOFT_SERIAL_PIN D2
/* ws2812 RGB LED */
/*
#define RGB_DI_PIN D3
#define RGBLED_NUM 12 // Number of LEDs
*/
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -23,22 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -44,22 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -49,22 +49,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -23,22 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -49,22 +49,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -49,22 +49,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -49,22 +49,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -59,12 +59,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
// # define RGBLIGHT_EFFECT_RGB_TEST
// # define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -59,12 +59,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -59,12 +59,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -58,12 +58,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
// # define RGBLIGHT_EFFECT_RGB_TEST
// # define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -44,22 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,22 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -40,16 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define USB_MAX_POWER_CONSUMPTION 100
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,16 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -44,22 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -50,22 +50,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SOFT_SERIAL_PIN D1 // or D1, D2, D3, E6
#define RGB_DI_PIN B4
// #ifdef RGB_DI_PIN
#define RGBLED_NUM 2
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 1, 1 }
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE

View file

@ -28,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_LEVELS 1
#define RGB_DI_PIN D6
// #ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@ -40,10 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 23
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #endif
/* Set to top left most key */
#define BOOTMAGIC_LITE_ROW 5

View file

@ -50,12 +50,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

View file

@ -47,12 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#ifdef RGB_MATRIX_ENABLE

View file

@ -42,22 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_LEVELS 3
#define BACKLIGHT_BREATHING
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -63,12 +63,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#ifdef RGB_MATRIX_ENABLE

View file

@ -38,22 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,22 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -41,16 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define USB_MAX_POWER_CONSUMPTION 100
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -58,22 +58,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -44,22 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -40,22 +40,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,13 +38,7 @@
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
#define RGBLED_NUM 10
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@ -55,13 +49,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE

View file

@ -42,22 +42,6 @@
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
// #define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 12
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -38,13 +38,7 @@
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
#define RGBLED_NUM 12
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@ -55,13 +49,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE

View file

@ -42,22 +42,6 @@
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
// #define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 12
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -42,22 +42,6 @@
#define LED_SCROLL_LOCK_PIN D4
#define LED_PIN_ON_STATE 0
// #define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 12
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -37,22 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN B2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 8
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -42,22 +42,6 @@
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -40,22 +40,6 @@
#define LED_CAPS_LOCK_PIN C7
#define LED_PIN_ON_STATE 0
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -47,22 +47,6 @@
#define LED_SCROLL_LOCK_PIN B3
#define LED_PIN_ON_STATE 0
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -40,22 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_CAPS_LOCK_PIN D0
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -41,22 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_CAPS_LOCK_PIN D5
#define LED_PIN_ON_STATE 0
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -43,22 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_SCROLL_LOCK_PIN B7
#define LED_PIN_ON_STATE 0
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -37,22 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 12
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -37,22 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

View file

@ -42,22 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_SCROLL_LOCK_PIN F6
#define LED_PIN_ON_STATE 0
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */

Some files were not shown because too many files have changed in this diff Show more