[Keyboard] Update Wakizashi 40 config and readme (#16505)

This commit is contained in:
xiao 2022-03-07 17:23:41 +10:30 committed by GitHub
parent 575e3e18f5
commit c810d8cc1b
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 12 additions and 10 deletions

View file

@ -1,9 +1,9 @@
{
"manufacturer": "fumbucker",
"manufacturer": "xia0",
"keyboard_name": "Wakizashi 40",
"maintainer": "fumbucker",
"maintainer": "xia0",
"debounce": 5,
"processor": "at90usb1286",
"processor": "atmega32u4",
"diode_direction": "COL2ROW",
"features": {
"audio": false,
@ -20,8 +20,8 @@
"unicode": false
},
"matrix_pins": {
"cols": ["C5", "C4", "D2", "D3", "D4", "D5", "C6", "D7", "B0", "B1", "B2", "B3", "B4"],
"rows": ["C0", "C1", "C2", "C3"]
"cols": ["F4", "F6", "F7", "B1", "B3", "B2", "B6", "B5", "B4", "E6", "D7", "C6", "D4"],
"rows": ["D3", "D2", "D1", "D0"]
},
"usb": {
"device_ver": "0x0001",

View file

@ -1,12 +1,12 @@
# Wakizashi 40
![Wakizashi40](https://cdn.thingiverse.com/renders/51/50/81/13/a9/7078248666f70b422127c6662cf79563_preview_featured.jpg)
![Wakizashi40](https://i.imgur.com/TVTfa0X.jpg)
Reverse stagger 40% keyboard based on the Katana 60.
* Keyboard Maintainer: [fumbucker](https://github.com/xia0)
* Hardware Supported: Teensy2++
* Hardware Availability: [thingiverse](https://www.thingiverse.com/thing:3467930)
* Keyboard Maintainer: [xia0](https://github.com/xia0)
* Hardware Supported: ATmega32u4
* Hardware Availability: [prusaprinters.org](https://www.prusaprinters.org/prints/128575-wakizashi-40-keyboard)
Make example for this keyboard (after setting up your build environment):
@ -16,4 +16,6 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
## Bootloader
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Capslock + R).
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available