[Keyboard] Added Cans12er keyboard (#7455)

* added cans12er keyboard

* updated readme

Updated the readme to conform with the provided template from the qmk_firmware githubpage

* Update keyboards/cans12er/README.md

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

* Changed configuration

Changed the configuration based on the Change Request from PR #7455 made by github user noroadsleft
This commit is contained in:
Can Baytok 2019-11-24 01:56:18 +01:00 committed by Drashna Jaelre
parent 9ea9806d67
commit d14573620d
6 changed files with 122 additions and 0 deletions

View file

@ -0,0 +1,18 @@
# Cans12er
![Cans12er](https://i.imgur.com/ZsO6QSI.jpg)
A 12-key, orthogonal keypad designed by Can!
* Keyboard Maintainer: [Can](https://github.com/canbaytok)
* Hardware Supported: Pro Micro Atmega32u4
* Hardware Availability: DIY with the [open-source design files](https://github.com/canbaytok/Cans12er)
Schematic can be found here: [EasyEDA](https://easyeda.com/senordoenermann/mediapad)
Build Instructions can be found here: [canbaytok/Cans12er](https://github.com/canbaytok/Cans12er)
Make example for this keyboard (after setting up your build environment):
make handwired/cans12er:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View file

@ -0,0 +1 @@
#include "cans12er.h"

View file

@ -0,0 +1,13 @@
#pragma once
#include "quantum.h"
#define LAYOUT_ortho_3x4( \
K00, K01, K02, K03, \
K10, K11, K12, K13, \
K20, K21, K22, K23 \
) { \
{ K00, K01, K02, K03 }, \
{ K10, K11, K12, K13 }, \
{ K20, K21, K22, K23 } \
}

View file

@ -0,0 +1,38 @@
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Can
#define PRODUCT cans12er
#define DESCRIPTION a simple 3x4 keypad. every part can be manufactured at home
/* key matrix size */
#define MATRIX_ROWS 3
#define MATRIX_COLS 4
/* key matrix pins */
#define MATRIX_ROW_PINS { F7, B1, B3 }
#define MATRIX_COL_PINS { D0, D4, C6, D7 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* number of backlight levels */
#ifdef BACKLIGHT_PIN
#define BACKLIGHT_LEVELS 0
#endif
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

View file

@ -0,0 +1,20 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
// this is the style you want to emulate.
#include QMK_KEYBOARD_H
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _KEYPAD 0
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_KEYPAD] = LAYOUT_ortho_3x4(
KC_A, KC_B, KC_C, KC_D,
KC_E, KC_F, KC_G, KC_H,
KC_I, KC_J, KC_K, KC_L
),
};

View file

@ -0,0 +1,32 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs