Commit graph

109 commits

Author SHA1 Message Date
Dasky
02451fcc75
[Keyboard] Add dz60rgb_ansi v2_1 (#14614)
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-09-27 22:26:30 -07:00
Ryan
6b74e48f81
Remove audio pin references in rules.mk (#14532) 2021-09-21 20:04:03 +10:00
Ryan
5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2021-09-12 15:27:29 +10:00
Ryan
4791cfae1a
Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
Zac Moulton
d7747a2d70
[Keymap] moults31 userspace and keymaps (#12025) 2021-09-10 18:56:50 -07:00
Ryan
7eea780a7d
Remove bootloader listings from rules.mk (#14330) 2021-09-10 13:35:46 +10:00
Drashna Jaelre
c5f41d42d8
Updated RGB Matrix suspend define part 3 (#13954)
* Updated RGB Matrix suspend define part 3

* Revert "Update config.h for kbdfans/kbd67/mkiirgb/v3 (#13978)"

This reverts commit 80015f7fb0.

* Add additional boards/keymaps
2021-08-22 09:46:35 +10:00
moyi4681
462e7f075a
move volcano660 to ilumkb folder (#13550)
* move volcano660 to ilumkb folder

* Update rules.mk

* Fix up readme

Co-authored-by: zvecr <git@zvecr.com>
2021-08-19 20:02:07 +01:00
QMK Bot
a995dd16a2 Merge remote-tracking branch 'origin/master' into develop 2021-08-19 15:51:56 +00:00
Tran Kim Tung
49be4860f7
[Keyboard] adds new keyboard version: dztech/dz60rgb_wkl/v2_1 (#14021)
* [Keyboard] adds new keyboard version: dztech/dz60rgb_wkl/v2_1

* Update keyboards/dztech/dz60rgb_wkl/readme.md

Remove external flash manual link

Co-authored-by: Ryan <fauxpark@gmail.com>

* dz60rgb_wkl/v2_1: remove NO_USB_STARTUP_CHECK

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-08-19 16:51:23 +01:00
James Young
4b453dca92
Remove MIDI Configuration boilerplate (#11151)
* remove keyboard-level instances of `MIDI_ENABLE = no`

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e  '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} +
```

Co-Authored-By: Nick Brassel <nick@tzarc.org>

* fix case-sensitivity issues on MIDI_ENABLE

Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} +
```

* replace `# MIDI controls` with `# MIDI support`

Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} +
```

* align inline comments

Aligns the inline comments to the length used by the QMK AVR rules.mk template.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes           # MIDI support;g'  {} +
```

* remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} +
```

* remove MIDI configuration boilerplate from keyboard config.h files

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-16 06:51:13 +10:00
James Young
a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
Joel Challis
70fb3e1aaf
__flash? (#13799) 2021-07-31 14:35:30 +01:00
Drashna Jaelre
3affdcb45b
Reduce firmware size in prep for #12670 (#13724)
* Reduce firmware size in pre for #12670

* Also disable pixel mode, just in case
2021-07-27 12:41:28 +10:00
Nick Brassel
394272a266 Merge remote-tracking branch 'upstream/master' into develop 2021-07-27 10:11:52 +10:00
datafx
b1c5a53a68
Add bootloader size (#13729)
* Add bootloader size

Bootloader size needs to be 6144 to allow QMK to jump to the correct location with bootmagic

* Include dz60rgb v2.1

Add boot loader size to this pcb also
2021-07-27 10:07:29 +10:00
Drashna Jaelre
0b95ac2e4b
Clean up remaining RGB_DISABLE_WHEN_USB_SUSPENDED defines (#13689) 2021-07-24 20:17:04 +01:00
Drashna Jaelre
7907a72584
[Keyboard] Reduce compile size for dz60rgb v2.1 (#13680) 2021-07-24 19:36:41 +10:00
QMK Bot
34a9acd090 Merge remote-tracking branch 'origin/master' into develop 2021-07-22 16:39:42 +00:00
Tran Kim Tung
95a7c22824
[Keyboard] adds new revision: dztech/dz60rgb/v2_1 (#13636) 2021-07-22 09:39:08 -07:00
QMK Bot
692e80d3c0 Merge remote-tracking branch 'origin/master' into develop 2021-07-20 05:26:17 +00:00
Michael
35ee990bd0
[Keyboard] fix LED issue BOCC keyboard (#13175)
Co-authored-by: Michael Wamsley <wamsl@Michaels-MacBook-Pro.local>
2021-07-19 22:25:46 -07:00
QMK Bot
e69c325a9c Merge remote-tracking branch 'origin/master' into develop 2021-07-14 17:50:47 +00:00
Ryan
99f637e82c
Fix some RGB Matrix-enabled keymaps referring to RGBLight mode (#13509) 2021-07-15 03:50:09 +10:00
QMK Bot
0b7936c4e8 Merge remote-tracking branch 'origin/master' into develop 2021-07-01 17:12:52 +00:00
Jakob Hærvig
bef73f44aa
[Keymap] Add haervig userspace and keymaps (#13362) 2021-07-01 10:12:19 -07:00
QMK Bot
29228e5b78 Merge remote-tracking branch 'origin/master' into develop 2021-07-01 07:42:50 +00:00
Jesper Nellemann Jakobsen
54f429edd8
[Keymap] Create bingocaller keymap for DZ60RGB-ANSI (#13311)
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-01 00:42:10 -07:00
QMK Bot
c234341cf6 Merge remote-tracking branch 'origin/master' into develop 2021-06-20 15:30:49 +00:00
Erovia
29df3ce83b
Fix/keyboard/dz65rgbv3 (#13268)
With the 'lufa-ms' bootloader LTO is needed so the keyboard can be built
with Configurator.
2021-06-20 16:30:23 +01:00
fauxpark
e3030bff5e Merge remote-tracking branch 'upstream/master' into develop 2021-06-20 12:10:59 +10:00
moyi4681
8694e2d3f0
[Keyboard] add dztech/dz65rgb/v3 keyboard (#13017)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-06-18 17:54:29 -07:00
Drashna Jaelre
7a6e630ffd
Fix RGB/LED Suspend defines (#13146) 2021-06-09 22:59:19 -07:00
Ryan
9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Victor Pivert
3efd94014f
piv3rt keymap for dztech/dz60rgb (#12591)
* Create piv3rt's keymap

* Use tabs's LED as a caps lock indicator

* Fix indentation (tabs -> spaces)

* Set inital LED matrix color & mode

* Rename layers and add an RGBRST keycode

* Disable unused RGB effects

* Add RGB profiles

* Use ESC's LED as a num lock indicator

* Light up the keypad when _NUM layer is active

* Realign layers

* Remove legacy layer

* Fix CAPS key macro

* Reduce TAPPING_TERM to 100

* Change the caps LED to red and display the numlock one on special layers

* Add french accentuated caps + minor improvements on layers

* Remove left numpad

* Add french quotation marks

* Add key KC_NUBS

* Add terminal copy/paste

* Disable led profile on wakeup

* Change the default color

* Add AMD replay and record keys

* Add a MacOS layer

* Move Numpad

* Add GPLv2 license information

* Optimise custom RGB matrix

* Move keypad toggle and disable MAC led indicator

* Remove unnecessary check for RGB matrix
2021-05-12 23:52:55 -07:00
MechMaster48
0b6d8150e4
Personal keymap for dztech DZ60RGB plus README.md (#12485)
* Personal keymap and README to go along with it.

* Noticed typo in README and removed name from comment in keymap

* Added GPL copyright notice
2021-04-21 19:50:26 -04:00
Benedict Tan
5581ea8809
[Keyboard] Update dz60rgb default keymap (#12488)
The keymap for this PCB as of April 5, 2020 has a 4rth, largely superfluous layer, creating a total of 5 layers.

When ported to VIA, this results in a layer that users can access but cannot edit. I propose removing this layer completely along with it's access from the default.
2021-04-19 01:20:51 -07:00
Felix Springer
6e79767f5a
[Keymap] jumper149 keymap for the dztech/dz65rgb (#12142) 2021-03-17 10:02:00 -07:00
Zach White
58e733b5a0 remove keyboard_folder from info.json 2021-02-27 16:17:12 -08:00
QMK Bot
02b5bb9b17 Merge remote-tracking branch 'origin/master' into develop 2021-02-16 15:50:59 +00:00
Daniil Kivenko
95304f269b
[Keymap] Adding HHKB Keymap for dz60rgb_wkl:v2 (#11840)
* adding new hhkb layout

* adding license header

* fix end of lines symbol

Co-authored-by: Daniil Kivenko <d.kivenko@evrone.com>
Co-authored-by: Daniil macbet Kivenko <macbet@wisebits.com>
2021-02-16 10:50:15 -05:00
Drashna Jaelre
7161d65070
Remove FAUXCLICKY feature (deprecated) (#11829) 2021-02-09 09:49:05 -08:00
fauxpark
ca7da3866d Merge remote-tracking branch 'upstream/master' into develop 2021-01-15 18:34:12 +11:00
Ryan
f325bd6eb2
Remove DESCRIPTION, B-D (#11513) 2021-01-15 05:00:04 +11:00
QMK Bot
31ffc1eeb0 Merge remote-tracking branch 'origin/master' into develop 2021-01-05 22:51:55 +00:00
kb-elmo
6009e7d8b5
[Keyboard] add dz96 (#11252)
* add dz96

* Apply suggestions from code review

* Update keyboards/dztech/dz96/keymaps/iso/keymap.c

* add image to readme
2021-01-05 14:51:10 -08:00
QMK Bot
8f867c1bef Merge remote-tracking branch 'origin/master' into develop 2020-12-21 14:39:10 +00:00
Zach White
c0dcee96a8
Initial list of keyboards to exclude from CI (#11213) 2020-12-21 15:38:39 +01:00
Nick Brassel
87291437bd
Add board specific to Proton-C, with usual defaults turned on. (#10976)
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C
- Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output
- Modified version.h generation so that SKIP_VERSION=yes generates the same output
2020-12-03 13:04:28 +11:00