Commit graph

68 commits

Author SHA1 Message Date
Joel Challis
1bb7af4d44
Relocate platform specific drivers (#13894)
* Relocate platform specific drivers

* Move stm eeprom

* Tidy up slightly
2021-08-17 23:43:09 +01:00
Joel Challis
ab941ce614
Move all the flash logic from tmk_core (#13927) 2021-08-15 21:55:23 +01:00
QMK Bot
75a58c3cef Merge remote-tracking branch 'origin/master' into develop 2021-08-10 08:03:36 +00:00
Ryan
d3932a104c
Add padding to LUFA-MS .BIN files (#13922) 2021-08-10 18:03:04 +10:00
Drashna Jaelre
71e9f8fc11
Update LUFA (18-07-2021) and add QMK-HID Bootloader support (#13588)
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-24 23:00:57 -07:00
fauxpark
03807c2c6e Merge remote-tracking branch 'upstream/master' into develop 2021-07-03 16:38:05 +10:00
Ryan
06e0643541
Add "Ctrl+C to cancel" to "waiting for bootloader" messages (#13424) 2021-07-03 16:34:22 +10:00
QMK Bot
06971da0be Merge remote-tracking branch 'origin/master' into develop 2021-06-16 04:20:45 +00:00
Purdea Andrei
ed0451bc28
Make atmel-dfu and chibios-dfu flashing behave more like caterina flashing. (#12552)
This commit makes atmel-dfu and chibios-dfu bootloaders retry to detect the bootloader
every 0,5 seconds (now configurable via the BOOTLOADER_RETRY_TIME makefile variable),
and a period is printed after every try. This is a much more pleasant behaviour than
the 5s retry timeout.
2021-06-16 14:20:44 +10:00
Sergey Vlasov
680cc1fab4
Fix firmware size check with avr-libc 1:2.0.0+Atmel3.6.2-1.1 (Debian bullseye) (#12951)
Debian bullseye (testing at the moment, but seems close to release) has
avr-libc 1:2.0.0+Atmel3.6.2-1.1 with some changes taken from the
Atmel-distributed toolchain.  In particular, the <avr/io.h> header for
ATmega32A (avr/iom32a.h) now defines the FLASHEND constant as `0x7FFFU`,
and that `U` suffix breaks the firmware size check code, because the
shell arithmetic expansion that is used to calculate `MAX_SIZE` does not
support those C-specific suffixes.

As a workaround, add `-D__ASSEMBLER__` to the C preprocessor invocation
that is used to expand those macros; in this case avr/iom32a.h defines
`FLASHEND` without the `U` suffix, and everything works as it did before
with older avr-libc versions.

The exact same code is present in two places; they are both changed,
even though the code in `tmk_core/avr.mk` is actually never used for
ATmega32A (and the header for ATmega32U4 does not add that `U` suffix to
`FLASHEND` for some reason).
2021-06-06 22:42:08 -07:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Sergey Vlasov
ffe81cbec1
Fix another bin/qmk reference (#12856) 2021-05-10 09:21:13 -07:00
Mateusz Piotrowski
38b9f67c3b
Fix qmk flash on FreeBSD (#12085)
When the USB device is connected, FreeBSD creates not one, but three
device nodes in /dev, e.g.: /dev/ttyU0, /dev/ttyU0.init, and
/dev/ttyU0.lock.

As a result, this leads to the USB variable containing 3 paths
(and therefore, whitespace) and messages like this one:

    Device /dev/ttyU0
    /dev/ttyU0.init
    /dev/ttyU0.lock has appeared; assuming it is the controller.

This changes fixes the use of the -z flag of "[" (see test(1)). Also, it
removes undesired paths from the USB variable, leaving only
one path there (i.e., "/dev/ttyU0").
2021-05-06 09:26:50 +10:00
Joel Challis
60e1910e5b
Add WSL specific logic for avrdude device detection (#12392) 2021-04-03 17:29:06 +01:00
Ryan
8556068534
Require BOOTLOADER = qmk-dfu for :bootloader target (#12136) 2021-03-07 17:39:35 +11:00
Joel Challis
f8266a228c
Migrate make_dfu_header to CLI (#12061)
* Migrate make_dfu_header to CLI

* lint fixes

* Update lib/python/qmk/cli/generate/dfu_header.py

Co-authored-by: Ryan <fauxpark@gmail.com>

* Rename object

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-02-28 21:25:09 +00:00
Frans de Jonge
2b9f200a2a
[fix] dfu-programmer <0.7 doesn't support --force flag (#10292)
Fixes <https://github.com/qmk/qmk_firmware/issues/10286>.
2020-09-13 02:17:47 +01:00
Ryan
6e948feb6a
Use the force when flashing with dfu-programmer (#10070) 2020-09-10 00:00:27 +10:00
Erovia
6b54f3ce1c CLI: Tune doctor's udev rule checking to match #8750 2020-05-15 12:59:46 -07:00
Zach White
640d12d070
Improve security of avrdude by eliminating the use of well-known names. (#9026)
* Improve security by eliminating the use of well-known names.

* Add an additional $ so the shell expands $TMP1 and $TMP2

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2020-05-10 04:08:13 +01:00
Ryan
bc13dcd349
Remove Atmel FLIP from install scripts and documentation (#8822) 2020-04-17 09:50:58 +02:00
Joel Challis
b6a09502c6
Migrate :program logic to :flash (#8631) 2020-04-01 13:27:16 +01:00
Joel Challis
e34764502f
Remove qmk archive generation (#8462) 2020-03-17 21:28:13 +00:00
Nick Brassel
b438c6f8ea
Fix up Arm builds with nix-shell. (#8312) 2020-03-07 03:05:51 +11:00
Nick Brassel
b28ee6b039 Fix misunderstanding of CPPFLAGS and CXXFLAGS. 2020-01-31 15:29:23 +11:00
fauxpark
c74295de88 Set proper AVR part for USBasp avrdude flashing (#7552)
* Set proper AVR part for USBasp avrdude flashing

* Remove `PROGRAM_CMD` stuff from rules.mk as they should not be needed anymore

* Missed the Plaid readme

* Remove PROGRAM_CMD from Mysterium
2019-12-07 23:32:43 -08:00
a_p_u_r_o
7874f297b3 Remove CR when computing BOOTLOADER_SIZE. (#7453) 2019-11-24 03:01:03 +11:00
Drashna Jaelre
02f77e7215 Actually use correct bootloader not found message (#6695) 2019-09-08 09:55:18 +10:00
Drashna Jaelre
44fd317a87 Move Bootloader not found message to global variable (#6688)
* Move Bootloader not found message to global variable

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-09-08 02:06:39 +10:00
Drashna Jaelre
bc86eb2233
Fix Typo in :flash target for missing bootloader (#6615) 2019-08-26 10:16:46 -07:00
Joel Challis
51bcadf38c Add 'bootloadHID' flash target (#5587)
* Add 'bootloadHID' flash target

* Prep for flash target

* Add :flash support

* Align bootloader wait messages

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update template to suggest use of :flash
2019-08-24 08:35:11 -07:00
Drashna Jaelre
4003d077ce Add a universal flash command for cli (#6224)
* Add universal flash command

* Add bootloader info to I:C boards

* Add support for ATSAM

* Add messages for flash target

* Message cleanup

* Add USB ASP Flashing target

* Make usbasp target more universal

* Add phoney target for usbasp

* Clarify error message when bootloader isn't matched
2019-08-20 15:39:24 -07:00
Drashna Jaelre
f859375284 Expand bootloader target to support most AVR boards (#6255)
* Update the :bootloader target to pass along correct hardware info

* Update make scripts to properly grab the settings (a big thanks to @yanfali)

* Remove LUFA debug warnings
2019-07-16 01:28:23 -07:00
yiancar
3538955778 Usbasploader bootloader option addition (#6304)
* Added USBasp bootloader option for USBasploader

* author comment

* ifdef fix :)

* Add usbasp target

* Update docs/flashing.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update docs/flashing.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update docs/flashing.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-07-15 19:11:59 -07:00
Takeshi ISHII
6d73fe1277 fix LIB_SRC and QUANTUM_LIB_SRC for ARM (#5623)
* fix LIB_SRC and QUANTUM_LIB_SRC for ARM(chibios)

* remove ARFLAGS

* tmk_core/arm_atsam.mk:AR: remove 'rcs'
2019-04-22 11:20:13 -07:00
Rob Rogers
afdc67184d correct typo in eeprom split target for dfu (#5445) 2019-03-18 23:25:34 -07:00
Danny
3c257c1c6e Add avrdude split EE_HANDS flash commands (#5414)
* Add EEPROM avrdude flashing commands for setting handedness

* Update docs with info on flashing EEPROM handedness files with commands
2019-03-15 14:05:50 -07:00
Michael F. Lamb
f34244a871 Sleep until USB port becomes writable before running avrdude (#5393)
* sleep until usb port becomes writable before running avrdude

* only wait for a writable USB port when not on MSYS

using MINGW or MSYS: sleep for one second, as before.

otherwise: wait for the port to become writable.

* typo

* typo
2019-03-13 14:00:09 -07:00
Jumail Mundekkat
149015e799 Fixed grep issue in bootloader build target (#3848)
* Changed use of '\s' in grep to '[ \t]' for portability

* Pushed DFU Keyboard.h into a shell script

* Fixed execution permissions on make_dfu_header,sh
2019-02-18 10:00:33 -08:00
Drashna Jaelre
4f1f52b53b Add left/right EEPROM flashing for DFU (#4560) 2018-12-14 18:39:54 -08:00
Takeshi ISHII
baebbc0967 add 'mavrdude' target into tmk_core/avr.mk (#3986)
* add 'mavrdude' target into tmk_core/avr.mk

I made it a little convenient when writing the same binary to multiple Pro Micro.

* rename target name 'mavrdude' to 'avrdude-loop'

* modify docs/flashing.md about avrdude-loop

* mdify docs/flashing.md again

* modifi docs/flashing.md 3rd
2018-09-27 22:02:12 -04:00
Jumail
74f2f855a3 Fixed bootloader target
Fixed matching grep matches (for PRODUCT in particular)
Fixed " Bootloader" concatenation for WSL (windows line-endings)
2018-08-29 13:43:12 -04:00
yiancar
b5d6c049e6 Bootloader make issue (#2975)
* Added Modular keyboards L,R and NUM

Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split

* Remove modular from master

This is to fix incorrect branching

* fixed bootloader makefile

- Echo -e does not behave coorectly on mac
- Replaced with equivilant printf statements

* quick typo fix
2018-06-06 18:24:26 -04:00
U-LANDSRAAD\drashna
c2bec5b3f0 Properly always copy firmware
This finishes fixing #2314, which mostly copies the firmware when compiling.
However, it misses `:teensy`, `:avrdude` and most importantly, `:production`
2018-03-29 15:38:42 -04:00
dankm
19a1fbaca2 Better non-Linux support (#2524)
* grep -> $(GREP)

Some UNIXy systems (FreeBSD for example) don't use GNU grep by default.
Allow the user to specify which grep implementation to use so that
GNU grep can be specified.

* Allow using versioned avr-gcc command

Don't hardcode "avr-gcc", and allow strings such as "avr-gcc8", or
"avr-gcc-7.3.0" to match checks for "avr-gcc".
2018-03-26 16:08:08 -04:00
uplus
687c7070a1 fix generate Keyboard.h 2018-03-16 16:32:46 -04:00
Danny
524053e3c0 Remap msys2 usb, fix USB port detection (#2301)
* Add AVRDUDE to MSYS2 setup

* Remap detected USB port in MSYS2 to COM port
2018-02-28 16:40:43 -05:00
Danny Nguyen
c5d81a84a0 Switch from echo to printf for output without newlines 2018-02-08 15:15:12 -05:00
Danny Nguyen
361810dca8 Only search through newly detected devices and discard ones that disappeared 2018-02-08 15:15:12 -05:00
skullydazed
9bfaf66792
Always copy the firmware file to the root qmk_firmware directory (#2314)
* Always copy the firmware file to the root qmk_firmware directory

* remove circular dependency
2018-01-28 11:11:28 -08:00