Commit graph

82 commits

Author SHA1 Message Date
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Fabián González Martín
90c7ae70c6
Modified tmk_core/rules.mk to avoid linking errors (#10728)
* Modified tmk_core/rules.mk to avoid linking errors

Added -fcommon flag to avoid linking errors due to multiple variable definitions. Though this is neither a definitive nor good solution, proper changes and use of extern  keyword to avoid those multiple definitions must be made

* Comment updated
2021-02-28 08:01:16 -08:00
Takeshi ISHII
3edfb93d5d
Add build debug option to tmk_core/rules.mk (#11324)
* Add DUMP_C_MACROS to tmk_core/rules.mk

* update DUMP_C_MACROS

* add VERBOSE_LD_CMD, VERBOSE_AS_CMD

* add VERBOSE_C_CMD, VERBOSE_C_INCLUDE

* update DUMP_C_MACROS, VERBOSE_C_INCLUDE, VERBOSE_C_CMD
2021-01-06 07:27:10 +09:00
Takeshi ISHII
6169b47e82
Add target 'check-md5' to build_keyboard.mk (#11338)
* Add target 'build-for-compare' to `build_keyboard.mk`

The `build-for-compare` target provides an easy way to check the md5 checksum of the generated binary.

You can easily see if there is any change in the generated binaries between the two versions, as in the example below.

```
$ git checkout 0.11.0
M	build_keyboard.mk
M	tmk_core/rules.mk
Note: checking out '0.11.0'.
HEAD is now at c66df1664 2020 November 28 Breaking Changes Update (#11053)

$ make helix:all:build-for-compare | grep ^MD5
MD5 (.build/helix_rev2_default.hex) = 5c3606562c944bb4d18832e601b45d4a
MD5 (.build/helix_rev2_edvorakjp.hex) = 9e43d13d389d518ba7e99cd7337e28d6
MD5 (.build/helix_rev2_five_rows.hex) = 8bcb61c2fd5d237c2997f2fa007d4934
MD5 (.build/helix_rev2_five_rows_jis.hex) = b97cd818d52f73ca2d4e78c86d90a791
MD5 (.build/helix_rev2_froggy.hex) = c492172364188f4e2918b10bf0f3a0a6
MD5 (.build/helix_rev2_froggy_106.hex) = b0861fd735a8f81881a8c02730641a2b
MD5 (.build/helix_rev2_led_test.hex) = 5c97d982a5da5cfb3dacb28a8934b81d
MD5 (.build/helix_rev2_xulkal.hex) = 01f603dc46bcf9094d7e106831d8f5b1
MD5 (.build/helix_rev2_yshrsmz.hex) = 5a008bca2d0c5790a151c02834c529ba

$ git checkout 0.11.1
M	build_keyboard.mk
M	tmk_core/rules.mk
Previous HEAD position was c66df1664 2020 November 28 Breaking Changes Update (#11053)
HEAD is now at cc08e3082 nix-shell: add milc dependency (#11086)

$ make helix:all:build-for-compare | grep ^MD5
MD5 (.build/helix_rev2_default.hex) = 5c3606562c944bb4d18832e601b45d4a
MD5 (.build/helix_rev2_edvorakjp.hex) = 9e43d13d389d518ba7e99cd7337e28d6
MD5 (.build/helix_rev2_five_rows.hex) = 8bcb61c2fd5d237c2997f2fa007d4934
MD5 (.build/helix_rev2_five_rows_jis.hex) = b97cd818d52f73ca2d4e78c86d90a791
MD5 (.build/helix_rev2_froggy.hex) = c492172364188f4e2918b10bf0f3a0a6
MD5 (.build/helix_rev2_froggy_106.hex) = b0861fd735a8f81881a8c02730641a2b
MD5 (.build/helix_rev2_led_test.hex) = 5c97d982a5da5cfb3dacb28a8934b81d
MD5 (.build/helix_rev2_xulkal.hex) = d848383adfd7463b138c6da179cf1436
MD5 (.build/helix_rev2_yshrsmz.hex) = 5a008bca2d0c5790a151c02834c529ba
```

* make builds reproducable by default

* update build_keyboard.mk: remove 'build-for-compare' target

* GNU make (3.81) on macOS 10.14(Mojave) does not have the 'undefine' directive.

* Adopted fauxpark's suggestion.

* Update tmk_core/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* update tmk_core/rules.mk

* fix tmk_core/rules.mk

Co-authored-by: Zach White <skullydazed@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-12-31 15:20:56 +09:00
Nick Brassel
167daa9cf8 Add ability to dump all makefile variables for the specified target. (#8256) 2020-08-29 14:30:02 -07:00
Joel Challis
b0c780ed32
Fix ChibiOS FPU build logic (#9132) 2020-05-20 16:28:39 +01:00
Ryan
bc13dcd349
Remove Atmel FLIP from install scripts and documentation (#8822) 2020-04-17 09:50:58 +02:00
Nick Brassel
05e9ff6554
Add support for hardware and board initialisation overrides. (#8330)
* Add support for hardware and board initialisation overrides.

* qmk cformat.

* Add some documentation.

* Docs clarity.

* Make early_hardware_init_pre a no-op for now, until migrations occur.

* Doco update

* Make distinction between keyboard and ChibiOS board in docs

* Doc anchors.

* Update tmk_core/protocol/chibios/main.c

Co-Authored-By: Joel Challis <git@zvecr.com>

* Rework bootloader entry to be off by default, allow opting-in.

Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-13 09:39:38 +10:00
Nick Brassel
b28ee6b039 Fix misunderstanding of CPPFLAGS and CXXFLAGS. 2020-01-31 15:29:23 +11:00
a_p_u_r_o
7874f297b3 Remove CR when computing BOOTLOADER_SIZE. (#7453) 2019-11-24 03:01:03 +11:00
Drashna Jaelre
4003d077ce Add a universal flash command for cli (#6224)
* Add universal flash command

* Add bootloader info to I:C boards

* Add support for ATSAM

* Add messages for flash target

* Message cleanup

* Add USB ASP Flashing target

* Make usbasp target more universal

* Add phoney target for usbasp

* Clarify error message when bootloader isn't matched
2019-08-20 15:39:24 -07:00
Drashna Jaelre
a71c461d03 Skip unsupported firmware check message in silent mode (#5765) 2019-07-15 23:21:00 -07:00
Takeshi ISHII
0f95c0865c add 'objs-size' target into tmk_core/avr.mk (#5490) 2019-07-15 22:45:31 -07:00
fauxpark
8e348c427d Display firmware size percentage (#6307) 2019-07-11 12:05:13 -07:00
skullydazed
7579518613 Fix chibios so the dfu-suffix is only applied once. (#6270) 2019-07-07 09:08:49 -07:00
Takeshi ISHII
6d73fe1277 fix LIB_SRC and QUANTUM_LIB_SRC for ARM (#5623)
* fix LIB_SRC and QUANTUM_LIB_SRC for ARM(chibios)

* remove ARFLAGS

* tmk_core/arm_atsam.mk:AR: remove 'rcs'
2019-04-22 11:20:13 -07:00
Takeshi ISHII
b9f6ff05d0 build size-check enhancement (#5485)
* build size-check enhancement

Changed to display a warning when the free size of compilation result is less than 512 bytes.

* update message.mk

* add SIZE_MARGIN variable, change default margin 512 to 1024

for Example.
```
$ make SIZE_MARGIN=2048 crkbd:all
$ make crkbd:all ## mergin is 1024
```

* Update message.mk

change message to ‘approaching the maximum’

Co-Authored-By: mtei <2170248+mtei@users.noreply.github.com>
2019-03-27 08:51:56 -07:00
Drashna Jaelre
d3f7910e68
Remove AUTOGEN and fix Travis Compiled Push scripts (#5077)
* Grab HEX and BIN files from autogen

And push them to qmk.fm/compiled

* Make autogen copy extension agnostic

This way, when travis cl scrpit looks for hex files, it will actually grab bin files, and not hex files for ARM boards

* Handle the AUTOGEN in :bin target to properly handle edge cases

Both the TADA68 and ATSAM boards generate the hex file and then convert it to a bin file. The changes I made does not handle this well, at all.  This removes the hex and replaces it with a bin, if a bin is normally generated.

* Revert hex target to original copy command

* Check hex and bin separately in compile push script

Since I don't know how to script this, well

* Simplify push to compiled folder

* Further simplify compiled push script

* Move AUTOGEN parsing to a more sane location to prevent tech debt

Thanks to skully!

* Remove AUTOGEN completely, as it's not needed

This has the benefit of making everything super simple, since we can pull every hex and bin from the root of the qmk_firmware folder, and move that to th compiled folder.  This also removes old and unneeded code, and removes some tech debt that has been accrued, without adding more, in theory.
2019-02-12 16:46:04 -08:00
Takeshi ISHII
8f790948e5 Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522)
* add temporary compile test shell script

* Extended support of SKIP_VERSION to make invariant compile results during testing.

* build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support

Support compiled object enclosed in library.

e.g.
```
LIB_SRC += xxxx.c
xxxx.c --> xxxx.o ---> xxxx.a
```

* remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c

* add SKIP_DEBUG_INFO into tmk_core/rules.mk

When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time.

* tmk_core/rules.mk: Library object need -fno-lto

* add SKIP_DEBUG_INFO=yes

* remove temporary compile test shell script

* add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h

* quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-14 21:31:56 -08:00
Ajax
b0a021c07a Made a userspace that allows you to use your keyboard as an order of operations based calculator (#2864)
* Made DZ60 layout with calculator

* Cleaned up and commented, preparing to fix bug with negative in front of open parenthesis as first character

* Fixed bug where negative sign infront of parenthesis as first character was parsed incorrectly

* Made a better solution for the bug from the previous commit

* Modularized and added a userfile so that this code can be used on various keyboards, found in doogle999

* Removed commented code from keymap

* Made the layer that is used for calculations a define so that it can be changed per keyboard

* Made the readme

* Made the readme in the correct place

* Revert "Made the readme in the correct place"

This reverts commit 7f8b59ed9e59c77401a48be3a7ac1e8fd8e84e32.

* Manually synced with qmk upstream

* Stopped repeat, made keys print character that they are defined as rather than what the keyboard wants them to do

* Added support for numpad, might make all keycodes custom so that there is no need to change doogle999.c if you want to change the keycode that is associated with a function, also made numpad automatically activating an option

* Fixed some bugs with backspacing, updated the readme

* Fixed some bugs with numlock turning on at the wrong times when a shift key was down

* Made the return to layer work automatically instead of just forcing it to layer 0

* fixes and style changes, 20% decreased binary size

* Fixed some bugs with double printing and compilation errors on my side

* Fixed bug with exceeding the buffer size

* Removed changes that added const-ness

* Made changes so that backspace does not repeat to remove backspace bugs, still some bugs with recalculating without having typed anything

* Fixed obo error with calc main loop

* Made includes more accurate in keymap for dz60

* Moved flags to user makefile
2018-10-23 12:44:48 -07:00
skullydazed
8ef747accf
Treat too-large firmwares as an error, not a warning (#3956)
* Treat too-large firmwares as an error, not a warning

* switch the order of printing

* I think I have it

* adjust the formatting some more
2018-09-27 13:32:01 -07:00
mtei
fe0683938a change messege at 'check-size' target 2018-08-16 12:04:35 -04:00
dankm
19a1fbaca2 Better non-Linux support (#2524)
* grep -> $(GREP)

Some UNIXy systems (FreeBSD for example) don't use GNU grep by default.
Allow the user to specify which grep implementation to use so that
GNU grep can be specified.

* Allow using versioned avr-gcc command

Don't hardcode "avr-gcc", and allow strings such as "avr-gcc8", or
"avr-gcc-7.3.0" to match checks for "avr-gcc".
2018-03-26 16:08:08 -04:00
Michael F. Lamb
fca31693df add conditional to perform check-size only for supported architectures 2018-02-08 16:47:18 -05:00
Michael F. Lamb
fae8132295 make check_size work across platforms 2018-02-08 16:47:18 -05:00
Erin Call
904b1b3f99 Use perl directly instead of grep -P
BSD grep (the one on OSX) lacks a -P flag. The grep -P command thus
fails and prints a usage message to the terminal. This fixes that.
2018-02-02 01:10:57 -05:00
skullydazed
9bfaf66792
Always copy the firmware file to the root qmk_firmware directory (#2314)
* Always copy the firmware file to the root qmk_firmware directory

* remove circular dependency
2018-01-28 11:11:28 -08:00
Jack Humbert
9fdc276260
Updates bootloader settings, adds file size check (#2029)
* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title
2017-11-27 23:08:21 -05:00
Jack Humbert
800ec55dfc Make arguments redo, subproject elimination (#1784)
* redo make args to use colons, better folder structuring system [skip ci]

* don't put spaces after statements - hard lessons in makefile development

* fix-up some other rules.mk

* give travis a chance

* reset KEYMAPS variable

* start converting keyboards to new system

* try making all with travis

* redo make args to use colons, better folder structuring system [skip ci]

* don't put spaces after statements - hard lessons in makefile development

* fix-up some other rules.mk

* give travis a chance

* reset KEYMAPS variable

* start converting keyboards to new system

* try making all with travis

* start to update readmes and keyboards

* look in keyboard directories for board.mk

* update visualizer rules

* fix up some other keyboards/keymaps

* fix arm board ld includes

* fix board rules

* fix up remaining keyboards

* reset layout variable

* reset keyboard_layouts

* fix remainging keymaps/boards

* update readmes, docs

* add note to makefile error

* update readmes

* remove planck keymap warnings

* update references and docs

* test out tarvis build stages

* don't use stages for now

* don't use stages for now
2017-10-14 11:32:19 -10:00
skullydazed
5fd68266f5 Clueboard 60% support (#1746)
* initial clueboard_60 support

* LED lighting support

* fix the clueboard->clueboard_66 rename

* Add layout support to clueboard_60

* Fix the 60_iso layout so it's actually iso

* add a default keymap for AEK layout

* fix clueboard_17

* Fixup the ISO layouts

* Fix the `wait_ms()/wait_us()` definitions for chibios

* Fix up the wait_ms/wait_us hack. Reduce stack size.

* Add a missing #include "wait.h"

* commit files that should have already been comitted
2017-09-29 16:17:30 -07:00
Jack Humbert
c3c07eff51 update building for .hex, secrets moving 2017-08-21 21:57:46 -04:00
Jack Humbert
26d348b6d1 move version info to the top of the output 2017-08-08 16:06:45 -04:00
Jack Humbert
5210f94a56 add version to make output 2017-08-08 16:06:45 -04:00
Fred Sundvik
d68294615f Add make option for allowing warnings 2017-04-13 16:12:55 +03:00
Fred Sundvik
f39e9928eb Enable warnings as errors 2017-04-13 16:00:29 +03:00
Fred Sundvik
13f3c73386 Fix the ldflags.txt and obj.txt checks
There was a minor typo, which caused the files to not be generated
and therefore the elf files were always linked.
2016-09-04 23:26:49 +03:00
Fred Sundvik
03b1d142f2 Add -p parameter to mkdir
So that it's created even when there's a deeper structure
2016-08-27 21:57:49 +03:00
Fred Sundvik
42baa6cf43 Disable map file creation when building tests
It causes strange linker warnings on cygwin.
2016-08-27 21:57:49 +03:00
Fred Sundvik
8a9aac6e32 Rules for compiling and linking google test 2016-08-27 21:57:49 +03:00
Fred Sundvik
48f8ab1ae2 Fix the clean target
It now properly cleans all the outputs
2016-08-20 12:44:04 +03:00
Fred Sundvik
9028a412ea Add output specific config file 2016-08-20 03:56:41 +03:00
Fred Sundvik
33fbd3be36 Output specific include paths 2016-08-20 03:56:40 +03:00
Fred Sundvik
3aac4e95c9 More general system for generating several outputs 2016-08-20 03:56:39 +03:00
Fred Sundvik
60c6e79ecb Move git submodule check and version generation to main Makefile 2016-08-20 03:56:32 +03:00
Fred Sundvik
cc2df445ab Remove unneded code from tmk_core/rules.mk 2016-08-20 03:56:31 +03:00
Fred Sundvik
a0dc622199 Remove the quick commands and add proper clean 2016-07-31 14:17:32 +03:00
Fred Sundvik
d5a947b324 Also depend on the gcc version 2016-07-31 13:49:04 +03:00
Fred Sundvik
84bfb19554 Force compilation and linking when options changes 2016-07-31 13:42:04 +03:00
Fred Sundvik
e58e9af2ab More reliable .d file generation
Also generated inside the obj dir instead of separate deps folder.
2016-07-31 13:36:30 +03:00
Fred Sundvik
f11a0275a8 Enable vpath seraching for source files only 2016-07-31 13:24:25 +03:00