Merge pull request #1057 from priyadi/selectable_output

Implement runtime selectable output (USB or BT)
This commit is contained in:
Jack Humbert 2017-02-07 13:12:29 -05:00 committed by GitHub
commit 0c2b6951a6
7 changed files with 192 additions and 74 deletions

View file

@ -1,4 +1,7 @@
#include "quantum.h"
#ifdef PROTOCOL_LUFA
#include "outputselect.h"
#endif
#ifndef TAPPING_TERM
#define TAPPING_TERM 200
@ -243,6 +246,36 @@ bool process_record_quantum(keyrecord_t *record) {
return false;
break;
#endif
#ifdef PROTOCOL_LUFA
case OUT_AUTO:
if (record->event.pressed) {
set_output(OUTPUT_AUTO);
}
return false;
break;
case OUT_USB:
if (record->event.pressed) {
set_output(OUTPUT_USB);
}
return false;
break;
#ifdef BLUETOOTH_ENABLE
case OUT_BT:
if (record->event.pressed) {
set_output(OUTPUT_BLUETOOTH);
}
return false;
break;
#endif
#ifdef ADAFRUIT_BLE_ENABLE
case OUT_BLE:
if (record->event.pressed) {
set_output(OUTPUT_ADAFRUIT_BLE);
}
return false;
break;
#endif
#endif
case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_NKRO:
if (record->event.pressed) {
// MAGIC actions (BOOTMAGIC without the boot)

View file

@ -15,7 +15,6 @@
#ifdef RGBLIGHT_ENABLE
#include "rgblight.h"
#endif
#include "action_layer.h"
#include "eeconfig.h"
#include <stddef.h>

View file

@ -141,6 +141,16 @@ enum quantum_keycodes {
PRINT_ON,
PRINT_OFF,
// output selection
OUT_AUTO,
OUT_USB,
#ifdef BLUETOOTH_ENABLE
OUT_BT,
#endif
#ifdef ADAFRUIT_BLE_ENABLE
OUT_BLE,
#endif
// always leave at the end
SAFE_RANGE
};

View file

@ -8,13 +8,14 @@ LUFA_PATH ?= $(LUFA_DIR)/LUFA-git
ifneq (, $(wildcard $(TMK_PATH)/$(LUFA_PATH)/LUFA/Build/lufa_sources.mk))
# New build system from 20120730
LUFA_ROOT_PATH = $(LUFA_PATH)/LUFA
include $(TMK_PATH)/$(LUFA_PATH)/LUFA/Build/lufa_sources.mk
include $(TMK_PATH)/$(LUFA_PATH)/LUFA/Build/lufa_sources.mk
else
include $(TMK_PATH)/$(LUFA_PATH)/LUFA/makefile
endif
LUFA_SRC = lufa.c \
descriptor.c \
outputselect.c \
$(LUFA_SRC_USB)
ifeq ($(strip $(MIDI_ENABLE)), yes)

View file

@ -53,6 +53,7 @@
#include "lufa.h"
#include "quantum.h"
#include <util/atomic.h>
#include "outputselect.h"
#ifdef NKRO_ENABLE
#include "keycode_config.h"
@ -589,59 +590,33 @@ void EVENT_USB_Device_ControlRequest(void)
/*******************************************************************************
* Host driver
p
******************************************************************************/
static uint8_t keyboard_leds(void)
{
return keyboard_led_stats;
}
#define SendToUSB 1
#define SendToBT 2
#define SendToBLE 4
static inline uint8_t where_to_send(void) {
#ifdef ADAFRUIT_BLE_ENABLE
#if 0
if (adafruit_ble_is_connected()) {
// For testing, send to BLE as a priority
return SendToBLE;
}
#endif
// This is the real policy
if (USB_DeviceState != DEVICE_STATE_Configured) {
if (adafruit_ble_is_connected()) {
return SendToBLE;
}
}
#endif
return ((USB_DeviceState == DEVICE_STATE_Configured) ? SendToUSB : 0)
#ifdef BLUETOOTH_ENABLE
|| SendToBT
#endif
;
}
static void send_keyboard(report_keyboard_t *report)
{
#ifdef BLUETOOTH_ENABLE
bluefruit_serial_send(0xFD);
for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
bluefruit_serial_send(report->raw[i]);
}
#endif
uint8_t timeout = 255;
uint8_t where = where_to_send();
#ifdef BLUETOOTH_ENABLE
if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
bluefruit_serial_send(0xFD);
for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
bluefruit_serial_send(report->raw[i]);
}
}
#endif
#ifdef ADAFRUIT_BLE_ENABLE
if (where & SendToBLE) {
if (where == OUTPUT_ADAFRUIT_BLE) {
adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys));
}
#endif
if (!(where & SendToUSB)) {
if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
return;
}
@ -681,30 +656,31 @@ static void send_keyboard(report_keyboard_t *report)
static void send_mouse(report_mouse_t *report)
{
#ifdef MOUSE_ENABLE
#ifdef BLUETOOTH_ENABLE
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x03);
bluefruit_serial_send(report->buttons);
bluefruit_serial_send(report->x);
bluefruit_serial_send(report->y);
bluefruit_serial_send(report->v); // should try sending the wheel v here
bluefruit_serial_send(report->h); // should try sending the wheel h here
bluefruit_serial_send(0x00);
#endif
uint8_t timeout = 255;
uint8_t where = where_to_send();
#ifdef BLUETOOTH_ENABLE
if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x03);
bluefruit_serial_send(report->buttons);
bluefruit_serial_send(report->x);
bluefruit_serial_send(report->y);
bluefruit_serial_send(report->v); // should try sending the wheel v here
bluefruit_serial_send(report->h); // should try sending the wheel h here
bluefruit_serial_send(0x00);
}
#endif
#ifdef ADAFRUIT_BLE_ENABLE
if (where & SendToBLE) {
if (where == OUTPUT_ADAFRUIT_BLE) {
// FIXME: mouse buttons
adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h);
}
#endif
if (!(where & SendToUSB)) {
if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
return;
}
@ -746,32 +722,34 @@ static void send_system(uint16_t data)
static void send_consumer(uint16_t data)
{
#ifdef BLUETOOTH_ENABLE
static uint16_t last_data = 0;
if (data == last_data) return;
last_data = data;
uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x02);
bluefruit_serial_send((bitmap>>8)&0xFF);
bluefruit_serial_send(bitmap&0xFF);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
#endif
uint8_t timeout = 255;
uint8_t where = where_to_send();
#ifdef BLUETOOTH_ENABLE
if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
static uint16_t last_data = 0;
if (data == last_data) return;
last_data = data;
uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x02);
bluefruit_serial_send((bitmap>>8)&0xFF);
bluefruit_serial_send(bitmap&0xFF);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
}
#endif
#ifdef ADAFRUIT_BLE_ENABLE
if (where & SendToBLE) {
if (where == OUTPUT_ADAFRUIT_BLE) {
adafruit_ble_send_consumer_key(data, 0);
}
#endif
if (!(where & SendToUSB)) {
if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
return;
}

View file

@ -0,0 +1,56 @@
/*
Copyright 2017 Priyadi Iman Nurcahyo
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "lufa.h"
#include "outputselect.h"
#ifdef ADAFRUIT_BLE_ENABLE
#include "adafruit_ble.h"
#endif
uint8_t desired_output = OUTPUT_DEFAULT;
void set_output(uint8_t output) {
set_output_user(output);
desired_output = output;
}
__attribute__((weak))
void set_output_user(uint8_t output) {
}
uint8_t auto_detect_output(void) {
if (USB_DeviceState == DEVICE_STATE_Configured) {
return OUTPUT_USB;
}
#ifdef ADAFRUIT_BLE_ENABLE
if (adafruit_ble_is_connected()) {
return OUTPUT_ADAFRUIT_BLE;
}
#endif
#ifdef BLUETOOTH_ENABLE
return OUTPUT_BLUETOOTH; // should check if BT is connected here
#endif
return OUTPUT_NONE;
}
uint8_t where_to_send(void) {
if (desired_output == OUTPUT_AUTO) {
return auto_detect_output();
}
return desired_output;
}

View file

@ -0,0 +1,41 @@
/*
Copyright 2017 Priyadi Iman Nurcahyo
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
enum outputs {
OUTPUT_AUTO,
OUTPUT_NONE,
OUTPUT_USB,
OUTPUT_BLUETOOTH,
OUTPUT_ADAFRUIT_BLE,
// backward compatibility
OUTPUT_USB_AND_BT
};
/**
* backward compatibility for BLUETOOTH_ENABLE, send to BT and USB by default
*/
#ifndef OUTPUT_DEFAULT
#ifdef BLUETOOTH_ENABLE
#define OUTPUT_DEFAULT OUTPUT_USB_AND_BT
#else
#define OUTPUT_DEFAULT OUTPUT_AUTO
#endif
#endif
void set_output(uint8_t output);
void set_output_user(uint8_t output);
uint8_t auto_detect_output(void);
uint8_t where_to_send(void);