Add and fix _noeeprom functions to many of the RGB Underglow functions (#3070)

* And and fix _noeeprom functions to many of the RGB Underglow functions

* Many functions are unnecessarily calling the eeprom write code. The toggle/enable is command is especially guilty of this, as it writes to EEPROM 3 times.  But rgb mode writes twice, every time it's called. And init resets the rgb eeprom range and then writes back to it twice!
* Fixed the rgblight_sethsv_noeeprom to work as expected, by moving a lot of the code to a helper function.
* Added a noeeprom function for mode, enable, disable, and toggle functions. (didn't bother for increase/decrease stuff, and didn't add new keycodes)
* Add to predefined colors list
* Add new functions to manual/docs

* Update RGB Sleep feature to use _noeeprom

Because that's exactly what it should be doing, actually!
This commit is contained in:
Drashna Jaelre 2018-05-29 08:05:22 -07:00 committed by Jack Humbert
parent 034a25aedf
commit 751719e6cb
5 changed files with 137 additions and 28 deletions

View file

@ -88,11 +88,36 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
Look in `rgblights.h` for all available functions, but if you want to control all or some LEDs your goto functions are:
```c
rgblight_disable(); // turn all lights off
rgblight_enable(); // turn lights on, based on their previous state (stored in EEPROM)
// turn all lights off (stored in EEPROM)
rgblight_disable();
// turn lights on, based on their previous state (stored in EEPROM)
rgblight_enable();
// turn all lights off (not stored in EEPROM)
rgblight_disable_noeeprom();
// turn lights on, based on their previous state (not stored in EEPROM)
rgblight_enable_noeeprom();
// where r/g/b is a number from 0..255. Turns all the LEDs to this color (ignores mode, not stored in EEPROM).
rgblight_setrgb(r, g, b);
// HSV color control - h is a value from 0..360 and s/v is a value from 0..255 (stored in EEPROM)
rgblight_sethsv(h, s, v);
// HSV color control - h is a value from 0..360 and s/v is a value from 0..255 (not stored in EEPROM)
rgblight_sethsv_noeeprom(h, s, v);
// Sets the mode, if rgb animations are enabled (stored in eeprom)
rgblight_mode(x);
// Sets the mode, if rgb animations are enabled (not stored in eeprom)
rgblight_mode_noeeprom(x);
// MODE 1, solid color
// MODE 2-5, breathing
// MODE 6-8, rainbow mood
// MODE 9-14, rainbow swirl
// MODE 15-20, snake
// MODE 21-23, knight
// MODE 24, xmas
// MODE 25-34, static rainbow
rgblight_setrgb(r, g, b); // where r/g/b is a number from 0..255. Turns all the LEDs to this color
rgblight_sethsv(h, s, v); // HSV color control - h is a value from 0..360 and s/v is a value from 0..255
rgblight_setrgb_at(r,g,b, LED); // control a single LED. 0 <= LED < RGBLED_NUM
rgblight_sethsv_at(h,s,v, LED); // control a single LED. 0 <= LED < RGBLED_NUM
```
@ -126,7 +151,7 @@ note: for backwards compatibility, `RGB_SMOD` is an alias for `RGB_MOD`.
## Hardware Modification
![Planck with RGB Underglow](https://raw.githubusercontent.com/qmk/qmk_firmware/master/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg)
![Planck with RGB Underglow](https://raw.githubusercontent.com/qmk/qmk_firmware/3774a7fcdab5544fc787f4c200be05fcd417e31f/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg)
Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY).

View file

@ -44,7 +44,6 @@ __attribute__ ((weak))
const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
rgblight_config_t rgblight_config;
rgblight_config_t inmem_config;
LED_TYPE led[RGBLED_NUM];
uint8_t rgblight_inited = 0;
@ -161,7 +160,7 @@ void rgblight_init(void) {
#endif
if (rgblight_config.enable) {
rgblight_mode(rgblight_config.mode);
rgblight_mode_noeeprom(rgblight_config.mode);
}
}
@ -218,7 +217,7 @@ uint32_t rgblight_get_mode(void) {
return rgblight_config.mode;
}
void rgblight_mode(uint8_t mode) {
void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) {
if (!rgblight_config.enable) {
return;
}
@ -229,8 +228,12 @@ void rgblight_mode(uint8_t mode) {
} else {
rgblight_config.mode = mode;
}
eeconfig_update_rgblight(rgblight_config.raw);
xprintf("rgblight mode: %u\n", rgblight_config.mode);
if (write_to_eeprom) {
eeconfig_update_rgblight(rgblight_config.raw);
xprintf("rgblight mode [EEPROM]: %u\n", rgblight_config.mode);
} else {
xprintf("rgblight mode [NOEEPROM]: %u\n", rgblight_config.mode);
}
if (rgblight_config.mode == 1) {
#ifdef RGBLIGHT_ANIMATIONS
rgblight_timer_disable();
@ -254,11 +257,20 @@ void rgblight_mode(uint8_t mode) {
rgblight_timer_disable();
#endif
}
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
}
void rgblight_mode(uint8_t mode) {
rgblight_mode_eeprom_helper(mode, true);
}
void rgblight_mode_noeeprom(uint8_t mode) {
rgblight_mode_eeprom_helper(mode, false);
}
void rgblight_toggle(void) {
xprintf("rgblight toggle: rgblight_config.enable = %u\n", !rgblight_config.enable);
xprintf("rgblight toggle [EEPROM]: rgblight_config.enable = %u\n", !rgblight_config.enable);
if (rgblight_config.enable) {
rgblight_disable();
}
@ -267,17 +279,34 @@ void rgblight_toggle(void) {
}
}
void rgblight_toggle_noeeprom(void) {
xprintf("rgblight toggle [NOEEPROM]: rgblight_config.enable = %u\n", !rgblight_config.enable);
if (rgblight_config.enable) {
rgblight_disable_noeeprom();
}
else {
rgblight_enable_noeeprom();
}
}
void rgblight_enable(void) {
rgblight_config.enable = 1;
eeconfig_update_rgblight(rgblight_config.raw);
xprintf("rgblight enable: rgblight_config.enable = %u\n", rgblight_config.enable);
// No need to update EEPROM here. rgblight_mode() will do that, actually
//eeconfig_update_rgblight(rgblight_config.raw);
xprintf("rgblight enable [EEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable);
rgblight_mode(rgblight_config.mode);
}
void rgblight_enable_noeeprom(void) {
rgblight_config.enable = 1;
xprintf("rgblight enable [NOEEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable);
rgblight_mode_noeeprom(rgblight_config.mode);
}
void rgblight_disable(void) {
rgblight_config.enable = 0;
eeconfig_update_rgblight(rgblight_config.raw);
xprintf("rgblight disable: rgblight_config.enable = %u\n", rgblight_config.enable);
xprintf("rgblight disable [EEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable);
#ifdef RGBLIGHT_ANIMATIONS
rgblight_timer_disable();
#endif
@ -285,6 +314,17 @@ void rgblight_disable(void) {
rgblight_set();
}
void rgblight_disable_noeeprom(void) {
rgblight_config.enable = 0;
xprintf("rgblight disable [noEEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable);
#ifdef RGBLIGHT_ANIMATIONS
rgblight_timer_disable();
#endif
_delay_ms(50);
rgblight_set();
}
// Deals with the messy details of incrementing an integer
uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) {
int16_t new_value = value;
@ -358,23 +398,22 @@ void rgblight_decrease_speed(void) {
eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this
}
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) {
inmem_config.raw = rgblight_config.raw;
void rgblight_sethsv_noeeprom_old(uint16_t hue, uint8_t sat, uint8_t val) {
if (rgblight_config.enable) {
LED_TYPE tmp_led;
sethsv(hue, sat, val, &tmp_led);
inmem_config.hue = hue;
inmem_config.sat = sat;
inmem_config.val = val;
// dprintf("rgblight set hue [MEMORY]: %u,%u,%u\n", inmem_config.hue, inmem_config.sat, inmem_config.val);
rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b);
}
}
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) {
void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom) {
if (rgblight_config.enable) {
if (rgblight_config.mode == 1) {
// same static color
rgblight_sethsv_noeeprom(hue, sat, val);
LED_TYPE tmp_led;
sethsv(hue, sat, val, &tmp_led);
rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b);
} else {
// all LEDs in same color
if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) {
@ -399,11 +438,23 @@ void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) {
rgblight_config.hue = hue;
rgblight_config.sat = sat;
rgblight_config.val = val;
eeconfig_update_rgblight(rgblight_config.raw);
xprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
if (write_to_eeprom) {
eeconfig_update_rgblight(rgblight_config.raw);
xprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
} else {
xprintf("rgblight set hsv [NOEEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
}
}
}
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) {
rgblight_sethsv_eeprom_helper(hue, sat, val, true);
}
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) {
rgblight_sethsv_eeprom_helper(hue, sat, val, false);
}
uint16_t rgblight_get_hue(void) {
return rgblight_config.hue;
}
@ -546,7 +597,7 @@ void rgblight_effect_breathing(uint8_t interval) {
// http://sean.voisen.org/blog/2011/10/breathing-led-with-arduino/
val = (exp(sin((pos/255.0)*M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER/M_E)*(RGBLIGHT_EFFECT_BREATHE_MAX/(M_E-1/M_E));
rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, val);
rgblight_sethsv_noeeprom_old(rgblight_config.hue, rgblight_config.sat, val);
pos = (pos + 1) % 256;
}
void rgblight_effect_rainbow_mood(uint8_t interval) {
@ -557,7 +608,7 @@ void rgblight_effect_rainbow_mood(uint8_t interval) {
return;
}
last_timer = timer_read();
rgblight_sethsv_noeeprom(current_hue, rgblight_config.sat, rgblight_config.val);
rgblight_sethsv_noeeprom_old(current_hue, rgblight_config.sat, rgblight_config.val);
current_hue = (current_hue + 1) % 360;
}
void rgblight_effect_rainbow_swirl(uint8_t interval) {

View file

@ -134,7 +134,16 @@ void rgb_matrix_decrease(void);
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1);
void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1);
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val);
void rgblight_mode_noeeprom(uint8_t mode);
void rgblight_toggle_noeeprom(void);
void rgblight_enable_noeeprom(void);
void rgblight_disable_noeeprom(void);
void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom);
void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom);
#define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF)
void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b);

View file

@ -76,6 +76,30 @@
#define rgblight_sethsv_magenta() rgblight_sethsv (300, 255, 255)
#define rgblight_sethsv_pink() rgblight_sethsv (330, 128, 255)
/* SET HSV List */
/* If you're doing layer indication, this is best, as it won't */
/* write to the eeprom, since it's limited (very high value). */
/* If you want to use modes with this (since you can), then you */
/* want to use rgblight_mode_noeeprom(x) instead. */
#define rgblight_sethsv_noeeprom_white() rgblight_sethsv_noeeprom ( 0, 0, 255)
#define rgblight_sethsv_noeeprom_red() rgblight_sethsv_noeeprom ( 0, 255, 255)
#define rgblight_sethsv_noeeprom_coral() rgblight_sethsv_noeeprom ( 16, 176, 255)
#define rgblight_sethsv_noeeprom_orange() rgblight_sethsv_noeeprom ( 39, 255, 255)
#define rgblight_sethsv_noeeprom_goldenrod() rgblight_sethsv_noeeprom ( 43, 218, 218)
#define rgblight_sethsv_noeeprom_gold() rgblight_sethsv_noeeprom ( 51, 255, 255)
#define rgblight_sethsv_noeeprom_yellow() rgblight_sethsv_noeeprom ( 60, 255, 255)
#define rgblight_sethsv_noeeprom_chartreuse() rgblight_sethsv_noeeprom ( 90, 255, 255)
#define rgblight_sethsv_noeeprom_green() rgblight_sethsv_noeeprom (120, 255, 255)
#define rgblight_sethsv_noeeprom_springgreen() rgblight_sethsv_noeeprom (150, 255, 255)
#define rgblight_sethsv_noeeprom_turquoise() rgblight_sethsv_noeeprom (174, 90, 112)
#define rgblight_sethsv_noeeprom_teal() rgblight_sethsv_noeeprom (180, 255, 128)
#define rgblight_sethsv_noeeprom_cyan() rgblight_sethsv_noeeprom (180, 255, 255)
#define rgblight_sethsv_noeeprom_azure() rgblight_sethsv_noeeprom (186, 102, 255)
#define rgblight_sethsv_noeeprom_blue() rgblight_sethsv_noeeprom (240, 255, 255)
#define rgblight_sethsv_noeeprom_purple() rgblight_sethsv_noeeprom (270, 255, 255)
#define rgblight_sethsv_noeeprom_magenta() rgblight_sethsv_noeeprom (300, 255, 255)
#define rgblight_sethsv_noeeprom_pink() rgblight_sethsv_noeeprom (330, 128, 255)
/* SET HSV List */
#define rgblight_sethsv_white_at(at) rgblight_sethsv_at ( 0, 0, 255, at)
#define rgblight_sethsv_red_at(at) rgblight_sethsv_at ( 0, 255, 255, at)

View file

@ -101,7 +101,7 @@ static void power_down(uint8_t wdto)
#ifdef RGBLIGHT_ANIMATIONS
rgblight_timer_disable();
#endif
rgblight_disable();
rgblight_disable_noeeprom();
#endif
// TODO: more power saving
// See PicoPower application note
@ -157,7 +157,7 @@ void suspend_wakeup_init(void)
#endif
led_set(host_keyboard_leds());
#ifdef RGBLIGHT_SLEEP
rgblight_enable();
rgblight_enable_noeeprom();
#ifdef RGBLIGHT_ANIMATIONS
rgblight_timer_enable();
#endif