Commit graph

13495 commits

Author SHA1 Message Date
mechlovin
793de76bb4
[Keyboard] Add hannah60rgb rev.2 PCB (#10287)
* add hannah60rgb_rev2

* add

* Update rev2.c

* fixed rgb matrix

* Update rev2.c

* update rules.mk

* update readme

* update

* Update config.h

* Update rules.mk
2020-10-04 12:23:35 -07:00
swampmonster
f176daa1ca
Adding VIA support to katana60 rev2 (#10442)
Co-authored-by: swampmonster <>
2020-10-04 13:55:54 +01:00
Sergey Vlasov
459ccb681f
OLED driver fixes (#10377)
* Fix dirtying in oled_write_pixel()

Set the dirty bit for the block only if oled_write_pixel() actually
changed the buffer state.  Without this check oled_write_pixel() could
not be used inside the oled_task_user() code using the “redraw always”
style, because the blocks touched by oled_write_pixel() would always
appear dirty, and oled_render() would not proceed beyond the first such
dirty block.

* Fix oled_write_pixel() with 90/270 degree rotation

Use oled_rotation_width instead of OLED_DISPLAY_WIDTH, so that a rotated
display would be handled correctly.

* Fix compilation with custom OLED_BLOCK_COUNT and OLED_BLOCK_SIZE

Some OLED sizes (e.g., 64×48) may require a nonstandard value of
OLED_BLOCK_COUNT.  The documentation says that this value may be
redefined in config.h, but actually trying to redefine it caused a
compile error, because the macro was redefined in oled_driver.c.
Make the OLED_BLOCK_COUNT definition in oled_driver.c respect any
user override, and do the same for OLED_BLOCK_SIZE just in case.

* Fix handling of out-of-range bits in oled_dirty

If a custom OLED_BLOCK_COUNT value is specified, some bits in oled_dirty
may not correspond to existing blocks; however, if those bits are set
somewhere (e.g., by code with sets oled_dirty to ~0 or even -1),
oled_render() would try to handle them and could access memory beyond
oled_buffer and perform hardware operations with out of range values.
Prevent this by masking off unused bits in oled_render(), and also avoid
setting those bits in other functions.

* Fix potentially wrong dirtying in oled_write_char()

oled_write_char() tried to mark the position just beyond the written
character as dirty; use (OLED_FONT_WIDTH - 1) to dirty the last position
still belonging to the character instead.

* Fix `#define OLED_BLOCK_TYPE uint32_t` on AVR

Using uint32_t as OLED_BLOCK_TYPE did not work properly on AVR, because
some bit shifts were performed using 16-bit int.  Add explicit casts to
OLED_BLOCK_TYPE to those shifts.
2020-10-04 05:44:19 +11:00
a_p_u_r_o
1fe7743af8
IS31FL3741 driver fixup (#10519)
* Fix issue with data transfer of CS1_SW7 to CS18_SW7.

* Fix issue with handling of scaling register buffer's dirty flag.

* Remove unused extern declaration.

* Compaction of struct is31_led utilizing bit fields.
2020-10-04 05:15:44 +11:00
Simon
a0467fda38
add info.json for XD75 keyboard (#10523)
Currently the XD75 is missing a info.json
attributing to non standardised use of QMK
2020-10-03 15:43:36 +01:00
George Mao
9e9b604234
Mark 'key_count' as optional within info.json docs (#10513)
* Update reference_info_json.md

key_count is now an optional field because it is better to get the keycount by counting the elements in the layout array.

* Updated Japanese documentation as well
2020-10-03 00:42:11 +01:00
James Young
eb4cf713bc
Update info.json for Slice RGB (#10514)
- add data for LAYOUT_all macro
- correct some rounding errors
- make the indentation consistent
- remove trailing whitespace
2020-10-02 21:20:00 +01:00
Nick Abe
9395a8700c
Add Slice RGB VIA Support (#10407)
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-10-02 17:27:16 +01:00
Joe Strong
4bbef61d60
Add joestrong keymap for quefrency rev 2 (#10503) 2020-10-02 17:26:05 +01:00
AlisGraveNil
266ff3339a
[Keyboard] FightPad! macropad by Clawsome (#10507)
* 1 Oct 20

* Update keyboards/clawsome/fightpad/config.h

* Update keyboards/clawsome/fightpad/rules.mk

* Update keyboards/clawsome/fightpad/info.json

* Update keyboards/clawsome/fightpad/readme.md

* Update keyboards/clawsome/fightpad/readme.md

* Update keyboards/clawsome/fightpad/info.json

* Update keyboards/clawsome/fightpad/config.h
2020-10-01 22:53:37 -07:00
Sturek
c01eb55109
[Keymap] VIA keymap for the Sofle (#10446)
* Added via support

* Now uses LTO_ENABLE

* Deactivated console to save space

* Update keyboards/sofle/keymaps/via/readme.md

* Added GPL license

* Update keyboards/sofle/keymaps/via/keymap.c

* Update keyboards/sofle/keymaps/via/keymap.c

* Update keyboards/sofle/keymaps/via/keymap.c

* Update keyboards/sofle/keymaps/via/keymap.c
2020-10-01 22:52:30 -07:00
Nic Lake
6e9b4a8309
[Keymap] niclake keymap for Boardwalk (#10488)
* Initializing Boardwalk layout

* rules.mk newline

* config.h newline

* qwerty num toggle -> tap-toggle

* errant K, and _LOWER momentary toggles

* Lack of autosave sucks

* Converting to HHKB layout

* TT(_NUM) added to num layer

* Final updates for Boardwalk initialization

* Final refinements

* newline

* Removal of extra includes

* Update keyboards/boardwalk/keymaps/niclake/config.h

#pragma once

* Removing comment block from rules

* Updates to my layout
2020-10-01 22:42:23 -07:00
Peter Peterson
1e5df7117d
[keyboard] add BM60Poker support (#10475)
* WIP working on new keymap

* tweaking keymap

* updated keymap

* cleaned up a little bit

* New preonic keymap

* my preonic keymap

* added mac layout

* preonic map update

* cleaning up old repo

* cleaning up to match upstream

* more cleanup

* removing old keymaps

* Added BM60 Poker

* Apply suggestions from code review

* Added license

* updated license

* updated license

* Fixed remaining licenses and added layout to rules
2020-10-01 17:13:34 -07:00
Žan Pevec
6888165b48
Fixed some small things and replaced deprecated definitions (#10414)
* Fixed some small things and replaced deprecated definitions

* Improvements

* Reverted kemyap change
2020-10-02 00:17:57 +01:00
yulei
8070b1ba88
Added replacement pcb for the matrix cain keyboard (#10436)
* added replacement pcb for the matrix cain keyboard

* update usb descriptor

* fixed led polarity

* Update keyboards/matrix/cain/cain.c

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/matrix/cain/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Apply suggestions from code review

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* rename from cain to cain_re

* Update keyboards/matrix/cain_re/readme.md

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-10-02 00:07:14 +01:00
ridingqwerty
726499553c
New keyboard: wsk/g4m3ralpha (#10431)
* adding alpha variants

* adding cajal layouts

* adding V2 PCB support

adding additional layouts for new PCB version, and correecting incorrect image in info file

* Cleanup master -- remove alpha9

* Cleanup master -- remove g4m3ralpha

* Cleanup master -- remove cajal & sl40

* Master cleanup -- re-add sl40

* Master cleanup -- correct SL40 image

* Add new keyboard: wsk/g4m3ralpha

* Added license attribution to .{c,h} files

* Update keyboards/wsk/g4m3ralpha/config.h

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/wsk/g4m3ralpha/rules.mk

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/wsk/g4m3ralpha/g4m3ralpha.c

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/wsk/g4m3ralpha/keymaps/default/keymap.c

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/wsk/g4m3ralpha/config.h

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/wsk/g4m3ralpha/info.json

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/wsk/g4m3ralpha/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: worldspawn00 <mcmancuso@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-01 23:58:13 +01:00
James Young
1d7e57ab85
BM60RGB ISO: update default keymap and layout macro (#10494)
* BM60RGB ISO: fix and extend default keymap

- correctly assigns the Non-US Backslash and Hash keys
- adds Function and Navigation keys
- use KC_GESC instead of KC_ESC to make Grave accent available

* Update layout macro

The layout is the ISO equivalent of QMK's `LAYOUT_60_ansi_arrow`.
2020-10-01 23:00:03 +01:00
nopunin10did
0cb7133e0d
Doc followup 9942 (#10473)
* Update feature_advanced_keycodes.md

* Update mod_tap.md
2020-10-01 22:19:57 +01:00
Jordan
f63a60a72a
Port mechmini v2 for VIA support (#10497)
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-10-01 22:19:01 +01:00
Danilo de Klerk
f68bb0cc3d
Add ddeklerk split_3x6_3 layout (#10470) 2020-10-01 22:14:46 +01:00
Juno Nguyen
2f01c6ee18
Update make rules for community/ortho_4x12/junonum (#10467) 2020-10-01 22:13:13 +01:00
James Young
10f5767010
Add 64_ansi and 64_iso Community Layouts (#10463)
* Add 64_ansi Community Layout

* Add 64_iso Community Layout

* Add readme.md with layout drawings

* Edit readme.md - fix layout drawings

Fix 65_ansi_blocker_split_bs and 65_ansi_blocker_tsangan drawings.

* Edit readme.md - suggestions per fauxpark

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-01 21:57:56 +01:00
ai03
b5d6f287d9
Southpaw Fullsize: Add VIA support (#10469)
* Add via configurator support

* Remove layers to fix via

* Re-add extra via layers since it seems to work now

* Replace tabs with spaces

* Update readme.md
2020-10-01 13:44:29 -07:00
Nic Lake
a13e918d47
[Keymap] Adding 2x2u default layout for Boardwalk (#10486)
* Adding 2x2u default layout for Boardwalk

* Defining the _RAISE layer
2020-10-01 12:39:36 -07:00
MechMerlin
b31df1af94
KBDFans KBD19x: VIA Support & LAYOUT macro fixing (#10401)
* first pass at fixing the key labeling

* second pass of fixing key labeling

* third pass of this key naming

* another pass of changing key naming

* another pass

* another pass

* another pass

* renamed it all

* give a good vid and pid

* add via keymap

* add on to the comments

* update readme and comments

* one more small change
2020-10-01 12:36:52 -07:00
yhr0x43
7a2124db6b
Crkbd implementing return value for matrix_scan() (#10422) 2020-10-02 04:41:21 +10:00
Tom Swartz
45f044907c
xd75re Multi-layer keymap (#10499)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-10-01 19:25:30 +01:00
sol
01d2a03258
Fix SPLIT_KEYBOARD compilation for ATMega*U2, which doesn't have VBUS/OTG control (#10460)
Co-authored-by: s-ol <s-ol@users.noreply.github.com>
2020-10-02 04:17:03 +10:00
yiancar
1960e25048
Enable Mediakeys for yiancar's 328p keyboards (#10476) 2020-10-01 19:05:47 +01:00
Adam Gwilliam
8fbea13a8f
resolve extra param issue in boardsource/5x12 via keymap (#10501)
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Danny <nooges@users.noreply.github.com>
Co-authored-by: Adam Gwilliam <agwilliam@yaharasoftware.com>
2020-10-01 18:38:12 +01:00
thompson-ele
d78a2b8145
[Keymap] VIA Support for Nein Macropad (#10496)
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-01 18:33:18 +01:00
yiancar
76e35e02cc
Rename nebula65 -> nebula68 (#10490)
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-01 17:27:18 +10:00
Jean Potier
272b3309dd
[Keymap] samae keymap for RGBKB Zen rev1 (#10350)
* Add samae's keymap to zen rev1

* Docs update

* Less animations

* A few cleanups

* Update keyboards/rgbkb/zen/rev1/keymaps/samae/keymap.c

* Update keyboards/rgbkb/zen/rev1/keymaps/samae/keymap.c

* Update keyboards/rgbkb/zen/rev1/keymaps/samae/keymap.c

* Update keyboards/rgbkb/zen/rev1/keymaps/samae/keymap.c

* Review fix: add copyright statement
2020-09-30 21:14:05 -07:00
Drashna Jaelre
11c308d436
[Keyboard] Convert ErgoDox EZ to Matrix Lite (#10189)
* Convert ErgoDox EZ to lite matrix

* Add initial config from Dactyl config

Based on ErinCall's work to generalize the mcp i/o expander matrix code

* formatting

* Fix number of pins

* Remove unused defines
2020-09-30 16:52:47 -07:00
Ryan
482c9fbbf2
MSYS2: Switch to arm-none-eabi-gcc package (#10421) 2020-10-01 04:10:02 +10:00
Keebz Dot Net
5ecb1b2d39
Wazowski 23-19 VIA Support (#9730)
* fixed keymap placement

- online configurator keys were in the wrong location and needed to be fixed
- fixed a key being to high on the y position

* Create rules.mk

* Create keymap.c

* Update rules.mk

added VIA support

* Changed wazowski via keymap to include skipped switch

* changed the vendor ID

* Update keyboards/keebzdotnet/wazowski/config.h

* Removed VIA enable from keyboard rules.mk

* Update keyboards/keebzdotnet/wazowski/rules.mk

* Fixed wazowski via keymap build errors

* Added multi-layer support for Wazowski via keymap
2020-09-30 01:50:55 -07:00
MakotoKurauchi
8b90822f6e
add tester keymaps for yushakobo/quick7 (#10282)
* update "Hardware Availability"

* add a section of "How to build"

* update "Hardware Supported"

* add tester keymaps for yushakobo/quick7

* update license headers in keymaps/tester/config.h

Co-authored-by: keyaki-namiki <28521374+keyaki-namiki@users.noreply.github.com>
2020-09-30 06:46:49 +09:00
Brandon Claveria
9f36aa640e
[Keyboard] Add astro65 handwired (#10449)
* Add pandemic keyboard

* Fix default keymap

* Add via keymap

* Fix via keymap

* Fix keymaps and pandamic.h

* add info.json

* update info.json

* Apply suggestions from code review

* Update keyboards/handwired/swiftrax/pandamic/info.json

* make suggested changes

* Add astro65

* fix info.json

* Apply suggestions from code review

* add more layers for via

* Apply suggestions from code review

* halp

* add other layout

* fix astro65.h

* commit suggestions

* Update keyboards/handwired/swiftrax/astro65/info.json
2020-09-29 04:30:14 -07:00
Reibl János Dániel
284a5267d5
Add Unicode modes for handwired/riblee_f401:riblee (#10461)
* Add unicode modes

* Update keyboards/handwired/riblee_f401/keymaps/riblee/config.h
2020-09-28 21:48:35 -07:00
Sendy YK
d844f5af70
Update mrsendyyk Community Layouts (#10338)
* Add layouts/community/numpad_5x4/mrsendyyk

* Update keymap.c

* Update readme.md

* Update readme.md

* Update readme.md

* Rename my community layouts

* Rename

* Rename

* Cleanup my code

* Update readme.md

* Cleanup

* Update keymap.c

* Delete unnecessary files
2020-09-28 21:32:38 -07:00
Joel Schneider
2eeb30cd5a
[Keyboard] Add SiCK-PAD handwired keyboard (#10429)
* Add sick_pad

* Adjust setup for Proton C

* Add readme

* Add info.json

* Make requested changes

* Resolve PR issues
2020-09-28 21:25:53 -07:00
MechMerlin
c7599bf49f
Swapparoo of bottom row keys (#10277) 2020-09-28 11:46:24 +10:00
Ryan
45c2a05e3a
Merge pull request #10457 from 2Moons-JP/trifecta_keymap 2020-09-28 11:41:24 +10:00
Drashna Jaelre
fbdc65e2e9
[Keyboard] Add PloopyCo devices (#7935)
* Initial Commit for Ploopyco Trackball

This is a WIP at this point.  Most of it compiles, but the SPI commands are non-functioning as they come from Arduino, so don't exist in LUFA

* Convert SPI commands from arduino to LUFA

But I have no idea if this is actually correct or not

* Update keyboard readme

* Clean up ploopyco trackball

* Update readme

* Update mouse key stuff

* last minutue cleanup

* Add caveat about scroll wheel

* Fixup to code

* Additional fixup

* Add movement multiplier

* Rename folders

* mid changes

* temp

* Got it working!!!!!

* Additional cleanup of code

* Make unused pin calls more compact

* Rotation info

* Add debouncing checks

* Make everything replaceable

* Add info.json

* Include ISP flashing info

* Better handling for user customization

* Reconfigure CPI stuff

* fix issues with debug printing

* Fix tiny scroll issue

* Add and update scroll code from ploopy mouse

* Update licensing

* Add PloopyCo Mouse

* Cleanup and layout stuff

* Move common files to main folder for reuse

* Increase polling rate

* Update image for mouse

* Apply changes from code review

* Add VIA support
2020-09-27 15:11:41 -07:00
ridingqwerty
34b9c51d9c
Keyboard update: SL40 (#10445)
* adding alpha variants

* adding cajal layouts

* adding V2 PCB support

adding additional layouts for new PCB version, and correecting incorrect image in info file

* Cleanup master -- remove alpha9

* Cleanup master -- remove g4m3ralpha

* Cleanup master -- remove cajal & sl40

* Master cleanup -- re-add sl40

* Master cleanup -- correct SL40 image

* Keyboard addenda: Production version of sl40

Co-authored-by: worldspawn00 <mcmancuso@gmail.com>
2020-09-27 23:04:24 +01:00
Joel Challis
50835bb138
[keyboard] Add SP-111 support (#10193)
* Initial sp111 support

* Align with template
2020-09-27 13:04:27 +01:00
Ryan
e7acd39b78
Consolidate udev rules into a single file (#9693)
* Consolidate udev rules into a single file

* Update rules in doctor.py

* Simplify doctor rule checking

* Fix errors

* Add TMK "FEED" VID to list of deprecated udev rules

* A comma would be nice

* Split rules back up into bootloaders

* Link to docs page in "missing" case

* Add Pololu VID

* Be more specific about Caterina devices, and add LilyPad PID
2020-09-27 20:36:33 +10:00
Ryan
70fce6564f
Add logic for AT90USBxx7 where needed (#10203) 2020-09-27 20:33:03 +10:00
2Moons-JP
323c6dfe72 Trifecta Keymap 2020-09-27 13:19:49 +09:00
precondition
28ff51175b
[Docs] Wording & formatting changes in the Tapping Force Hold section of the Tap Hold page + removed trailing whitespaces (#10391)
* Wording & formatting changes in Tapping Force Hold

The Permissive Hold and the Ignore Mod Tap Interrupt sections were also modified to remove the quotes
around "tapping".

* Removed all trailing whitespaces from tap hold doc

* "it's simply really:" → "it's simple really:"

* "This allows to keep the ability" → "This allows keeping the ability"

Used the gerund form of "to keep" in the Tapping Force Hold section of the Tap Hold docs.

Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>

Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
2020-09-26 19:11:40 -04:00