Commit graph

23 commits

Author SHA1 Message Date
Dasky
7f7364c559
[Core] Split support for pointing devices. (#15304)
* Draft implementation

* formatting

* fix combined buttons

* remove pimoroni throttle

* sync pointing on a throttle loop with checksum

* no longer used

* doh

Co-authored-by: Drashna Jaelre <drashna@live.com>

* switch pimoroni to a cpi equivalent

* add cpi support

* allow user modification of seperate mouse reports

* a little tidy up

* add *_RIGHT defines.

* docs

* doxygen comments

* basic changelog

* clean up pimoroni

* small doc fixes

* Update docs/feature_pointing_device.md

Co-authored-by: Drashna Jaelre <drashna@live.com>

* performance tweak if side has usb

* Don't run init funtions on wrong side

* renamed some variables for consistency

* fix pimoroni typos

* Clamp instead of OR

* Promote combined values to uint16_t

* Update pointing_device.c

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-12-27 12:05:51 +11:00
Dasky
12a8e59e9c
[Docs] add sync options heading, update led indicators (#14441)
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-09-15 10:11:25 -07:00
Joakim Tufvegren
0ae20e7457
Make solo half of split keyboards (more) usable. (#13523)
* Make solo half of split keyboards (more) usable.

Using only one half of a split keyboard (that's using the split_common
framework to communicate) is not a great experience, since several read
timeouts per scan cycle cause an unusably slow scan rate.

This change blocks all split communication attempts for 500 ms
(configurable) after an error occurs, causing the scan rate to become at
least _more_ usable, but might need some tweaking to work fully on most
keyboards. One read timeout still needs to occur after the 500 ms has
passed, and if that timeout isn't low enough, some scan cycles may still
be too slow.

* Fix lint complaint.

* Require 25 consecutive comm errors to see comms as disconnected.

The number of max errors can be overridden by defining
`SPLIT_MAX_CONNECTION_ERRORS`.

* Add comments to new defines, and ability to disable disconnection check.

Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible
by most relevant numbers for the description.

* Make lint happy ...again

* Only update `connection_check_timer` when needed.

* Add new defines to split keyboard documentation.

* Move connection timeout logic to transport.c, add `is_transport_connected`.

* Use split_common disconnection logic in matrix.c.

Instead of doing more or less the same thing twice.

* Move disconnection logic to `transport_master`.

Is a cleaner implementation, and causes the scan rate while disconnected
to increase instead of decrease.

* Lint fixes.

* Lower default `SERIAL_USART_TIMEOUT` to 20 ms.

The read timeout must be low enough to not cause exessively long scan
cycles when using a solo split half. 10 ms was determined from testing
to work fine even with the slowest defined baudrate of 19200 (5 ms was
too low for that case), so 20 ms should be fine for most cases.

* Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h

Was somewhat mistakenly included in an earlier PR.

* Fix building with `USE_I2C`.

* Reduce built firmware size.

Not really sure why this works, the idea was taken from tzarc's work on
split disconnection.

* Tweak and improve opt-out for split disconnection logic.

There are now two ways to opt out from this feature:
* Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable
  the connection status checks (also affects the slave matrix reset logic in
  matrix.c, though).
* Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the
  communication throttling while disconnected. Will make the firmware
  smaller.

* Make split disconnection logic work with custom transports.

Includes a fallback implementation for keyboards using a custom
split_util.c but not a custom matrix.c (currently no such keyboard seems
to be merged, though).

* Remove unnecessary include of timer.h

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2021-08-22 10:51:17 +10:00
Drashna Jaelre
488aaa0980
Enable sync of OLED/ST7565 display on/off state on Splits (#13542)
* Enable sync of OLED/ST7565 display on/off state on Splits

* Only send if states are not matched

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-15 15:39:08 +10:00
Jameson Thatcher
550d9253b0
Allow invert of SPLIT_HAND_PIN logic (#13433)
* added support for inverting the hand pin for split keyboards

* Added docs about SPLIT_HAND_LOW_IS_LEFT

* Update docs/feature_split_keyboard.md

bring #define for split hand pin low for left half name in line with grid pin define

Co-authored-by: Joel Challis <git@zvecr.com>

* Update quantum/split_common/split_util.c

update split hand pin low is left name to match split hand grid define

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2021-07-05 09:06:40 +10:00
Nick Brassel
172e6a7030
Extensible split data sync (#11930)
* Extensible split data sync capability through transactions.

- Split common transport has been split up between the transport layer
  and data layer.
- Split "transactions" model used, with convergence between I2C and
  serial data definitions.
- Slave matrix "generation count" is used to determine if the full slave
  matrix needs to be retrieved.
- Encoders get the same "generation count" treatment.
- All other blocks of data are synchronised when a change is detected.
- All transmissions have a globally-configurable deadline before a
  transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms).
- Added atomicity for all core-synced data, preventing partial updates
- Added retries to AVR i2c_master's i2c_start, to minimise the number of
  failed transactions when interrupts are disabled on the slave due to
  atomicity checks.
- Some keyboards have had slight modifications made in order to ensure
  that they still build due to firmware size restrictions.

* Fixup LED_MATRIX compile.

* Parameterise ERROR_DISCONNECT_COUNT.
2021-06-18 09:10:06 +10:00
Markus Knutsson
449b4b8d86
[Docs] Update feature_split_keyboard.md (#13205) 2021-06-13 20:20:19 -07:00
Albert Y
e961e34c7f
Add EE_HANDS documentation command example (#12730)
* Add command example

* Remove c tag

Co-authored-by: filterpaper <filterpaper@localhost>
2021-05-20 19:03:56 +09:00
individ-divided
4c3090ace9
Documentation changes SPLIT_USB_DETECT and hid_listen udev rules (#11665)
Co-authored-by: David Grundberg <david@quartz>
2021-03-03 13:31:41 -08:00
Trevor Elliott
d0108869ee
[Docs] MATRIX_MASKED docs for SPLIT_HAND_MATRIX_GRID (#11974) 2021-03-01 21:29:11 -08:00
XScorpion2
d1806a26e4
Split transport mirror (#11046)
* Split transport mirror support

* Updated RGB Matrix to respond to electrical events instead of key events

* split matrix slave fix
2021-02-16 11:30:33 +11:00
Casey Webster
5e2b53541b
Add modifier state to the split keyboard transport (#10400)
* Add modifier state to the split transport

This adds modifier state to the i2c and serial transport for split
keyboards.  The purpose of this is to allow e.g. displaying modifier
state on the slave side of a split keyboard on an oled.  This adds one
byte to the data transferred between halves.

This also fixes a missing ifdef guard for BLACKLIGHT_ENABLE.

Break modifiers into real/weak/oneshot

Fix incorrect slave serial mod setting

Fix typo in serial weal mod setter

Fix build errors for the I2C code that I introduced

Code cleanup and formatting per project preferences

Correctly get oneshot mods

Fix missing braces

Remove unneeded ifdef guard

Make the added state transport optional

Add documentation for the new define to enable this feature

Fix stray grave mark

* Fix error introduced in conflict resolution
2020-12-17 16:21:26 +11:00
Drashna Jaelre
16d55b14b7
[Docs] Add VBUS hack for teensys (#10986) 2020-11-27 21:03:31 -08:00
Takeshi ISHII
088888937a
Replace figures in docs/feature_split_keyboard.md (#10242)
* Replace figures in feature_split_keyboard.md

* fig update

* Update docs/feature_split_keyboard.md

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-09-06 21:15:55 -07:00
Takeshi ISHII
5c8b23ccff
add SPLIT_HAND_MATRIX_GRID support (#8685)
Co-authored-by: Danny <nooges@users.noreply.github.com>
2020-07-04 15:04:47 +01:00
Joel Challis
6d84795bc1
Update ARM split keyboard docs (#9160)
* Update ARM split keyboard docs

* Update docs/serial_driver.md

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-05-22 06:20:46 +10:00
Joel Challis
307be48de9
Reduce SPLIT_USB_TIMEOUT by 500ms (#7637)
* Update SPLIT_USB_TIMEOUT -500ms

* Align keyboard level SPLIT_USB_TIMEOUT defaults

* Align keyboard level SPLIT_USB_TIMEOUT_POLL

* Review fixes
2020-02-04 19:37:04 -08:00
Adam Perlman
1971f22285 Update split i2c docs for example of when pull-ups are required (#7143) 2019-10-28 18:10:25 +00:00
Joel Challis
76378d74f5 ARM split - detect USB to select master/slave (#6424)
* Initial split refactor to allow usb master detection

* Add split USB detect docs

* Add SPLIT_USB_DETECT demo mode limitation

* fix rebase issues

* clang-format
2019-10-11 23:25:43 -04:00
Joel Challis
17794e0b25
ARM split - Add support for dfu-util EE_HANDS flashing (#6543)
* Initial stab at some fake dfu-util-split-left behaviour

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Clang format fixes

* Fake eeprom init for both left and right hand
2019-09-27 21:33:55 +01:00
Danny
36dd261d06 Add support for different encoder pinout for right half of split keyboard (#6521)
* Add support for different encoder pinouts for split keyboard

* Update documentation for new encoder pinout feature
2019-08-16 16:46:41 -07:00
Garrett Singer
f644db042c [Split] Add config option for DIRECT_PINS_RIGHT (#6479)
Adds support for different direct pin mappings on the halves of a split keyboard.
2019-08-03 21:26:02 -07:00
Drashna Jaelre
311d625c56 [Docs] Add dedicated page for Split Keyboard information (#5802)
* [Docs] Add dedicated page for Split Keyboard information

* Apply suggestions from code review

Co-Authored-By: drashna <drashna@live.com>

* Fix Typos

Co-Authored-By: drashna <drashna@live.com>

* Fix some formatting issues

* Add Additional RGB info

* Fix Bulletted formatting

* Apply suggestions from code review

Co-Authored-By: drashna <drashna@live.com>

* Fix line wrapping

* Additional fixes and expansion

* Reword warning/note

Co-Authored-By: drashna <drashna@live.com>

* add i2c/serial coexistance info

* i2c markdown

* Change i2c wiring text

Co-Authored-By: drashna <drashna@live.com>
2019-07-15 23:23:32 -07:00