88ca4ec2cb
* Initial support for Durgod K320 with BootMagic Lite - Adding missing files - Add Unicode Map Support & new user keymap - Remove personalized features from Default keymap - Added Unicode Map to both Default and kuenhlee keymap.c - Updated readme.md - Added additional Fn Shortcut keys * Additional support for Durgod K320 - Simplifying default keymap - Renaming durgod_k320 => durgod/k320 - Removing copy of ST_NUCLEO64_F070RB from K320. Replacing with local board.h - Adding Mac keyboard layout for K320 as alternative via Fn+F12 - Implementing Windows Key lock on K320 - Cleaning up duplicated core functionality - Adding default_toggle_mac_windows keymap with: - Ability to toggle between Windows and MacOS layout - Mac Media Lock functionality. * Updating K320 keymap readme Co-authored-by: kuenhlee <eos.camera.lee@gmail.com>
60 lines
2.1 KiB
Markdown
60 lines
2.1 KiB
Markdown
# K320
|
|
|
|
This is a standard fixed ANSI TKL from off the shelf Durgod Taurus K320 without Backlight.
|
|
|
|
* Keyboard Maintainer: [dkjer](https://github.com/dkjer)
|
|
* Hardware Supported: Durgod Taurus K320 board with STM32F070RBT6
|
|
* Hardware Availability: https://www.durgod.com/page9?product_id=47&_l=en
|
|
|
|
## Instructions
|
|
|
|
### Build
|
|
|
|
Make command example for this keyboard (after setting up your build environment):
|
|
|
|
make durgod/k320:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make durgod/k320:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
### Initial Flash
|
|
|
|
For first Flashing from initial Stock's Firmware
|
|
|
|
1. Back up original Firmware Image:
|
|
- Unplug
|
|
- Short Boot0 to Vdd (See below)
|
|
- Plug In USB
|
|
- Make a Flash Image's Backup in case you wanted to restore the Keyboard to Stock's Image:
|
|
- Using DFUseDemo.exe from ST's STSW-STM32080: https://www.st.com/en/development-tools/stsw-stm32080.html
|
|
- Using dfu-util (thanks to [tylert](https://github.com/tylert) for instructions!):
|
|
|
|
|
|
dfu-util --list
|
|
dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
|
|
|
|
2. Flash the QMK Firmware Image.
|
|
- Put board into Bootloader mode, using the same method as when backing up the original Firmware (above)
|
|
- Here are a few options for performing the initial Flash:
|
|
- Using [QMK Toolbox](https://github.com/qmk/qmk_toolbox)
|
|
- Using DFuseDemo.exe if STTub30 driver is used.
|
|
- Using dfu-util:
|
|
|
|
|
|
dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${NEW_QMK_BIN}
|
|
|
|
You can short Boot0 to Vdd by shorting R21 to C27 on the sides closest to the processor, as shown:
|
|
|
|
<img src="https://i.imgur.com/hvDnw5a.jpg" width="520" height="693" alt="Shorting Boot0 to Vdd on K320">
|
|
|
|
### Subsequent Flashing
|
|
|
|
For repeating Flashing you can use BootMagic:
|
|
- BootMagic Lite has been enabled with Assigned "Esc" key
|
|
- Unplug USB Cable
|
|
- Holding Esc Button
|
|
- Plug in USB Cable, Keyboard should be in ST-Bootloader state
|
|
|